Is there a default combination for brinks model 5054 safe

notify brinks or a locksmith

since manufacturer cant assist you will need a locksmith

https://www.sentrysafe.com/CustomerCare/Lost_Your_Combination


Contact Sentry. They can give you a default combo so you can reset it and program it with your own and get inside.

Wish you luck!

This lock is a pin tumbler lock and can be impressioned by a locksmith. If you can't find anyone in your area that has the blanks you can send the lock to A1-Locksmith and we will make you Brinks key's

try taking it to a lock smith it will cost about 15.00 to 20.00 depending who you go to they will make a key or find the combination call a round . good luck

Hi, You can contact Honeywell at 1-800-223-8566 . They are providing support for Brinks safes.

You can mail a notorized letter, requesting a combination...include model and serial number...mail to Sisco, 2835 E, Ana Street, Compton, CA 90221.....or fax it to 310-638-3489. I had the same problem and found out thru a Brinks website.

go to honeywellsafes.com apparently brinks was bought out

To bad you dismantled. Here is the turning sequence:
General Turning Sequence Instruction NOTE SAFE MODEL 5054/5055/5059/5080/5081/5084/5111/5190/5195/5575/5700/5702.

Combinations consist of FOUR (4) positions (numbers).
BEFORE YOU START
Before you begin, please clear all settings by turning the dial CLOCKWISE (to the right)
three times. We also recommend to try the procedure with your safe door open first. Then
follow these steps:
TURNING SEQUENCE
1. Start the dial on 0 (zero).
2. Turn the dial to the RIGHT, passing your first combination number FOUR (4)
times and stopping at that number on the fifth time around.
3. Turn the dial to the LEFT, passing your second combination number TWO (2)
times and stopping at that number the third time around.
4. Turn the dial to the RIGHT, passing your third combination number ONE (1) time
and stopping at that number the second time around.
5. Turn the dial to the LEFT, to the last combination number and STOP.
6. Insert the key in the cylinder lock and turn RIGHT to open.
Your safe should now be opened.