Computer shuts off when a document is about to print.

There are two ways paper can come out. Just enter/insert/ push in the tray from the back of the printer.
If you need further assistance leave a comment. Cheers

DJ, Open your Word Processor and go to File->Print. Here you will find an option to change the sequence of printing. Change it.

That is a temperature error with the fuser, most likely the thermistor. Really the fuser needs to be replaced. Hope this helps.

On board menu.

Access and go through menu click print head clean. Or reinsert disc should have extra faciliies.?

Depending on the age of the model, it could be a couple of things. ***Never touch the drum or expose it to bright light*** The drum unit is bad. It's the shiny brightly-colored large roller in the center of the machine. On most recent smaller machines like this on it's integrated into the toner cartridge. Check it out. If it has toner build up on the ends, it's bad. or The corona wires need cleaning. Some machines have a small slide that moves from one side of the printer to the other which cleans the hidden corona wires. It's usually brightly colored .

Hi there,

I had same problem and when I installed OKI B4350 (PCL) driver it started working fine.
Before I had OKI B4350(PS) driver installed and it gave me invalid data error everytime I've pressed print.
I hope this works for you too.
Cheers,
T

Any one of them....there's no specific model.

I have found that the printer will automatically feed out the back if you have the "paper catcher" pulled "OUT". Try pushing the back "paper catcher" "IN".

This sounds like it could be a "toner Sense" error / try removing the drum unit and cleaning the 6 contacts on the left inside of the printer

Look at page 12 of the manual that can be viewed here: http://my.okidata.com/PP-B4350.nsf?opendatabase Make sure that the tray that the paper is coming out onto now is pushed in. That should do it Ed