I'm having the same problem but still it won't work
I tried the solution #:1 3 times already but still it won't work..the computer detects the hard drive but i still can't see it in "my computer"...pls help me solving this problem..if you don't mind, could you send the answer to my email? thank you so much..
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Some external storage devices work poorly or not at all when connected to a hub; try connecting the drive directly to a port on the computer. Also check if it's detected in "Disk Management". Here you can verify if the partition and format are correct for the Operating System. Check the Drive's status in Device manager. This will verify if the external drive has a drive letter designation. Check Partition and Format. Log in as Administrator account in windows or any other account with administrative privileges Insert your removable disk into the USB port. Click Start, right click on computer and select manage. Now, click Disk Management. Check whether drive letter for the device is present. Check the lower window to find whether the device is detected (such as Disk 1, Disk 2, etc). If the device is detected with a drive letter, verify that no other device is using that drive letter. If it is, change it to unused drive letter. Hope this helps.
Hello Klpook, Hi, 1. scan your PC with an antivirus software, if the action failed to work, 2. use another PC to check if your Hard drive is good. if the other PC failed to detect you hard drive. 3. Use Hard drive utilities, such as Disk manager for Western Digital to diagnose your HD. If by chance no positive work is done. Your drive is bad.
If the external hard drive is not detected by yur computer, try first connecting the drive on a different USB port so we can test the USB port and then after that if still not yet detected try a different USB cable to test the cable and after that still not detected connect the drive on different computer so we can see if this is already a hardware problem.....
- Make sure that the hard drive (HD) is properly connected to the computer.
- Try connecting it to a different computer to make sure that the HD is the problem.
- Check the Disk Management in your computer to see if the HD could still be detected. Once detected, reformat the HD and it should work again.
To check the Disk Management:
NOTE: Make sure that the external HD is connected and turned ON.
1. Right-click "My Computer" (XP) or "Computer" icon (Vista) 2. Select Manage and click on "Disk Management". 3. From the Disk Management, you will see a drive letters 4. Write down all the drive letters and then disconnect the Maxtor HD from the computer. 5. If there's a drive letter that disappears, then that is your Maxtor HD. 6. Reconnect the Maxtor HD and reformat it. You may right-click the drive letter and there's an option to format the HD.
If you're hearing a clicking sound while the HD is turned on, mostly, it's already defective.
have you ever tried of inserting it to other computers?
If it is still not detected, one way or another, it could be your flash drive is already not working.
Maybe the last time you have defragmented it causes the drive to be destroyed for some reasons such as computer hardware problem.
If it is now detected, check if you can still recover the data. Your last option will be to format your drive so you can start new. Im sorry but in my experience you cannot anymore recover the data if it is already gone.