Question about Sony KP-57HW40 57" Rear Projection Television

1 Answer

No picture The TV just shows a black screen and the stanby light keeps flashing red

Posted by on

  • roberval Nov 09, 2007

    standby light flash for 8 times before pause, what the solucition for this and tv turn off.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers

Sony has a built-in set of error codes that help in determining what's wrong. Count the number of flashes before a slight pause and then it will repat the flashes over and over... A set of six flashes, pause and six more would indicate possibly Q8027 and D8021 possibly bad... Common problem with these sets
The most common "dead" problem in this unit is the "D" board which is Sony p/n# A-1348-038-A and costs about $185.00 dollars plus a core charge and shipping.
It would however help tremendously if we knew how many blinks it was putting out for the error code
Hope this helps.

Posted on Nov 05, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Got a Samsung dnie model code spp4251x/data tv when powering up the front light comes on but no picture or anything anyone got some good info??

tv seems to turn on but no picture? - Forums - CNET > Forums > Samsung

CNETJun 11, 2015 - ... Samsung Dlp TV (HLR-5067W) it seems like the TV turns on butthere is no picture. ... the lamp is, light is visible from where the lamp is located but no picture. DLP Twon't turn on, blinking green lamp light then shuts dow ...
Jun 11, 2015
Samsung Plasma TV - Won't turn on
Jun 11, 2015
The timer, lamp, and standby/temp. light are flashing?!
Jun 11, 2015
Samsung TV Keeps Shutting Down
Jun 11, 2015
More results from

TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
May 8, 2014 - Uploaded by
TV Repair Help for a TV With a Black No Image on the Screen ...I Have A Sanyo TV I Can Hear But Black Screen Im 14 And Dont Know What To Do ! .... power button the power light goes from red to green, the screen flashes on then goes black ....Troubleshooting LCD Backlight Failure Samsung LNT-4066 ...

Samsung plasma tv repair blinking light no picture ...

Jan 09, 2016 | Samsung Televison & Video

1 Answer

Why power/stanby blinks light red

how many times does it flash? The back of the manual will usually tell you what the flashes mean. Try this: unplug tv from power. While unplugged, hold the power button in on the TV, not on the remote! Hold for 10 seconds. Replug the power and try to power it up. If you get no picture, you need a repair. Contact the manufacturer for an authorized servicer.

Jul 19, 2010 | Sony KDF-E42A10 42 in. LCD Television

1 Answer

Red stanby light is flashing with sound but no picture 1996 sony projection screen.I also here a clicking noise sometimes.

I will forward a link to a page where you can get more information about this issue.

Jun 16, 2009 | Sony KP-61V75 61" Rear Projection...

1 Answer

New Sharp Aquos LC37X20E. After 30 mins turns itself off to standby and comes back on after 2-5mins (even though the automatic return to stanby has been set to "disable"). Eventually after...

According to Sharp it is a software problem. Engineer came, installed software update ,10 minute job.....TV worked fine for 1/2 day unfortunately: Then images turned black and white in all channels TV turned itself off, and stanby and OPC buttons started flashing. When TV came back on its own 10 mins later , screen had 2 large square staines superimposed in image (as if it was a burnt screen)...Engineer will be back next week...all quite sad really for a new TV.....will keep u posted

Jul 03, 2008 | Sharp Televison & Video

1 Answer

Powers on then right back of light flashes 8 times

i have a sony wide screen projection tv KP-51WS500 Red stand by light on flashs no picture

Mar 10, 2008 | Sony KP-51WS500 51" Rear Projection...

1 Answer

When i take a picture with flash, the screen goes black and a red light flashes

after i take a picture on my nikon coolpix the screen goes black for about 30 seconds before you can take another picture.

Feb 10, 2008 | Nikon Coolpix S1 Digital Camera

1 Answer

Flashing light

this unit will have what is called ik protection wich means that the picture tubes are constantly monitor with this system all the way to the video procesor so the picture will desapear to a black screen even if the audio is ok,there may be a solution if contract a tech like me to adjust the bias so that compensates the drives to the pictures tubes since 1 or the 3 pt are week at this point.

Dec 25, 2007 | Sony KP61XBR200 TV

Not finding what you are looking for?
Sony KP-57HW40 57" Rear Projection Television Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts


Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74990 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides