We sold our WT-46807 to some one we know. It worked fine for two days. On the third day, when they turned it on, to sound came on but they could not get a picture. We never had any problems with the set before. I feel sooooooo bad and don't know if we should refund some money or not. Could the set have been damaged during transportation? It was driven 5hours laying on it's back
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You've got a bad solder connection,or broken foil line,s on the pcb (printed circuit board).Narrow it down by pressing in different places,or use plastic or rubber tip.If not,then you got a shorted load on this fuse and diode.do you have a schematic,whats at the end's of this circuit.D represents a <Diode> not a transistor.
I have a 64' samsung tv , It did the same thing and it was the lamp inside it. I bought it online at parts store.com, it works fine now. We fixed it ourselves and didnt know the first thing about tvs. Good luck
with the set turned off press INPUT and MENUE on the front of set.
now count the flashing led.
it will pause for a secon number count on error code
like one blink then fast two blink this is a error code of 12 meening set is ok but then ther are manny other codes.
i need the code to help you out.
I just finished fixing one of this units and there a few thing that i changed, the voltage regulator and 2 capacitors and as prevention repair i did some resoldering in the power supply and horizontal ckt
There could be a Pip problem or the vertical sweep could have went out also so then the set shuts down the video so it does not burn a line across the tubes. Theres really no way to tell what is wrong or it would just be a guess, a shot in the dark. Call out an authorized repair depot and get an estimate. Good Luck