Re: Breaker keeps flipping and I see sparks what going...
Sparks are usually due to loose electrical connections. If the sparks are from the breaker, it's either faulty or making poor contact with the buss bar in the breaker panel.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No, that's not normal. It could be a problem with the breaker, or (more likely) it's tripping for a legitimate reason --- something's wrong with the wiring or something plugged into the circuit. You should call an electrician, but you can do a little trial and error. If this is the main breaker, then turn some of the branch breakers off to see if you can isolate the conditions under which it occurs.
Resetting the breakers please...don't.... it may cause a fire or the like... The Breaker is tripping because there is some fault to earth... IT is VITAL you get a Registered Electrician & get him to check it over. DO NOT TOUCH IT WHILE THE POWER IS ON! It could be LETHAL..
the first thing i would do is to remove the feed wire from the breaker and see if will reset if it does you have a short in the system , tell me more about the system and maybe i can advise further
i think you will find the power cord is burned this happens if it wasnt tightend up properly and gets loose turn the oven breaker off before you pull it out
×