Question about Sub-Zero 245

1 Answer

Ice maker is not making ice

The ice bin has had the same small amount of ice in it for some time and no new ice is being made

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Hello. i can help.

If your ice maker has stopped producing ice completely, check these, in this order:

  • It may be turned off. Look for the wire along the right side of the ice maker that looks a bit like a coat hanger. If the wire is in the raised position, the ice maker is turned off. If so, try one of these:

    • If your ice maker has a small red plastic lever, lower it to lower the wire.

    • If there's no plastic lever, simply lower the wire.

    In either case, the ice maker should begin producing ice again. Also make sure that the temperature is 8 degrees Fahrenheit or lower. If the freezer is too warm, the ice maker won't cycle properly.

  • The ice maker fill tube may be blocked with ice. If so, melt the blockage using a hair dryer-but be careful to not melt any plastic parts! Also replace the water shut-off valve or water-inlet valve, or both, if necessary.

  • The ice maker head assembly may have broken parts. Look to see if the gears are broken. Check to see if the small plastic arms that rest against the ice rake are broken. If the ice maker head assembly is modular and you've found broken parts, you can just replace it.

Small or too few ice cubes If the ice maker is producing ice poorly--making small cubes or too few cubes--you probably have a clogged water line, a defective water-inlet valve, or a defective ice maker mold thermostat that isn't cycling properly.

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ice maker does not make much ice


The amount of ice usually deepens on the freezer temperature. The colder it is the faster the ice production. Assuming the ice cubes are full size and not hollow.

Jun 30, 2015 | Refrigerators

1 Answer

Ice maker, "water flow adjustment" tool


That is an Allen wrench, just buy a cheap set of them at the hardware store.
image_19723-t5w2rdby4urlkkgfawlc4jw5-1-0.jpg

Mar 25, 2017 | Kitchen Appliances - Others

1 Answer

Where do I turn ice maker off and on? I have misplaced owner's manual on model gss251frf ww.


Ice makers make ice until the ice bin is full, and as you use the ice, it replaces what is used. This is accomplished by a wire that measures the amount of ice in the bin. The wire moves up and drops the ice and then moves down to measure the ice. If the bin is full, the wire will be held in the "up" position which turns the ice maker off. You can manually lock the wire in the up position and it will never make ice. Releasing the wire will start the ice making process.

Jan 18, 2012 | GE Refrigerators

2 Answers

Franklin chef ice maker fim70 finished running cleaning cycle. have cleaned plugs, lines, on rear and sprayer inside bin. water continues to run, ice forms on top (w/ frost). Ice never drops.


Hello

Ice may jam up in an ice dam and close off the chute. Shove the ice scoop up into the chute with a fair amount of force to break up the ice dam. Chunks of ice should fall into the bin, followed by a shower of ice cubes.

Jun 21, 2011 | Franklin Freezer Chef FIM70 Commercial Ice...

3 Answers

My cme 256a8 model scotsman ice melts to fast will not fill my 250 lb. bin in four days. What is the problem? in a hour run time it makes 7 lbs of ice and 4 lbs. water. in one dump cycle it makes 3 lbs...


There are a couple of things to check. The machine must be level. You can remove the front cover and the plastic sheet that covers the plate where the ice is made. Check to see that the water is flowing from the manifold at the top of the plate. You may have to pop the hose off the end of that manifold to clean the water holes out. It must flow evenly over the plate. Probably the most common problem is the radiator coil there the fan draws air through is clogged up so that it can't dissapate heat properly. You should be able to feel a lot of hot air moving through the coils. The fan cycles on and off periodically to maintain a certain pressure in the freon. That is normal. Clean the fan coils and level the machine.

Sep 16, 2010 | Scotsman Ice Maker CM3 30inW Cubed Ice...

1 Answer

Ice maker is over filling


Hi there,

Ice maker has adjustment on right side of power head. If ice maker is inside on upper left, you can remove white cover from it and the adjusting screw in on right. Turning counter-clockwise will decrease fill by 1/2 to 3/4 of ounce. Sounds like a small amount, but ice make only uses 4 ounces per fill. If this does not fix, try replacing fill valve. If ice maker ice bin is in the freezer door, you have to remove cover to ice maker in the top of freezer. Ice maker is screwed into top of freezer and need to be removed to take off cover to adjuster screw. same procedure for reducing water flow time as above.

Thanks

Aug 12, 2009 | Whirlpool Refrigerators

1 Answer

Ice Maker Overfills With Water


Ice maker has adjustment on right side of power head. If ice maker is inside on upper left, you can remove white cover from it and the adjusting screw in on right. Turning counter-clockwise will decrease fill by 1/2 to 3/4 of ounce. Sounds like a small amount, but ice make only uses 4 ounces per fill. If this does not fix, try replacing fill valve. If ice maker ice bin is in the freezer door, you have to remove cover to ice maker in the top of freezer. Ice maker is screwed into top of freezer and need to be removed to take off cover to adjuster screw. same procedure for reducing water flow time as above.

Jul 23, 2009 | Whirlpool ED2FHEXN Side by Side...

1 Answer

LG ice maker only making two ice cubes at a time


Colenoid in the ice dispenser may be clogged or have a small amount of trash in it. Is there a filter on before the fridge (just after the ice maker shutoff)?

Mar 21, 2009 | LG LRSC26910 Side by Side Refrigerator

2 Answers

Melded mass of ice in bin


The only thing I can offer is to limit the out put of the machine closer to what your needs are.Or bag the ice and store in a freezer. The ice pushing down while melting is what is causing the BIG FREEZE. The bin for storage may be too big for your needs, at least at the time you write this. When the demand goes up (warmer weather) the ice would be used more and the pressure pushing down will alternate as well as people getting scoops out more often this will help prevent such a freeze up in warmer weather. 

Dec 01, 2008 | Scotsman Cooled Modular Contour Cuber Air...

Not finding what you are looking for?
Refrigerators Logo

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sub-Zero Refrigerators Experts

ACME Sub Zero...
ACME Sub Zero...

Level 2 Expert

41 Answers

Sal DeAngelo

Level 3 Expert

2122 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Sub-Zero Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...