At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Mohamed
regarding Error E 071 of SC-810 control please check :
1- thread trimmer cam correct adjusted or not.
2- there is a lot of thread into motor pulley or machine pulley.
3- if error E 071 coming immediately when turn power ON means problem inside control box, to confirm that please put working control box on machine , if error remove means problem at control box.
best regards
ASHRAF ABOZID [email protected]
CAIRO - EGYPT
hello dear
regarding JUKI MOL-254 error ( unknown command trap* address er 010:9afc ) that's means there's a conflict inside control box at main board or problem at main EP-ROM ( software for main board ).
- just try to make refresh for machine and let me know.
best regards
ASHRAF ABOZID [email protected]
CAIRO - EGYPT
Hi there
can you please inform me more information about machine model , control model? i can help at that matter.
regards
ASHRAF
CAIRO - EGYPT [email protected]
hello there first please tell me the model of control box? is that error appear emmdiatlty when turn power ON? please email me at ( [email protected] ) i will try to do the best to resolve this problem. best regards ashraf abozid
×