Question about Power Color PowerColor ATI DVI Adaptor for Converting from DVI to CRT Fits a (ADAPTER) Motherboard

1 Answer

Samsung tv help me get convergence

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Your ATI has two DVI connectors but your monitor can only take CRT. In the box came an adapter to change your video signal from DVI to CRT. You connect this to your monitor cable & hand tighten the 2 screws, this connects to the video card. While in windows open control panel, than open Display than click Settings. Click Advanced. Among the tabs here, there should be a tab that says Catalyst Control Center. This is where you setup your display. You can't be switching between the two DVI ports. Ya need to stay with one. The second is for another monitor.
In here is also Help. The control center will help you adjust your adapter. If you do not have the Catalyst Control Center you'll have to download it from this link:
Please vote...

Posted on Jan 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Samsung HDTV model HCL4715w1 has horizontal wavy lines in the middle of the screen. Is it worth Fixing? Any solutions to this problem?

Yes,tv screen have R,G,B colors lines mis alingnments,have colors shaded pictures or 3D pictures look aike?Tv have a problems known as convergence pictures problems.The tv convergence board it is dead.This convergence board must require replacement of 2 STK convergence ICS and some or all of it resistors too.Fixed the tv convergence board to solved the tv convergence pictures problems.U have some mechanical skills like take things aparts and putting it back together again?Yes,try website like to buy a whole refurbish tv convergence board for the replacement.The DLP tvs brands names Samsung and Akai used the same tv convergence board.Or tries those tvs shops will cost u like $300-$350 for parts and labors.

Jun 28, 2011 | Samsung HCL4715W 47" Rear Projection...

1 Answer

Samsung hcn4226wx/xaa red color out of focus

Ok first of all, the convergence board you are looking for is no longer available from Samsung, probably because of the large failure these boards are having. The only thing to do though would be to replace the convergence amp IC's on the convergence amp board. this will involve locating the convergence amp board, going to, entering your model number, without the /xaa prefix. Locating the list of parts for this TV set, and getting the right convergence amp IC's for this TV set. The numbers for the convergence amps are STK-392-040. You will also need to get the service manual for this TV set to perform touchup convergence, as well as to realighn the magic focus into the memory of this TV set. If you have the ability to solder and unsolder, you should have no problem replacing thes convergence amp IC's. But i will have to say this, about 45% of these TV sets do still have a problem after the convergence IC's are replaced. this is usually due to the burnt ground return resustors on the convergence board, so be perpared to know how to read a scematic diagram in the service manual and to trouble shoot the board. There is no simple repair to this problem I'm afraid, with this Samsung TV set. But , if at any time, you feel lost in the repair of this set, do not continue, and call out a pro to assist you in the repair of this TV set. Good Luck with the repair of this TV set.

Jun 26, 2007 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Problem with the Samsung HC-P4363W 43 in. TV/DVD Combo TV shows partialy double vision in blue color.

The tv have a problems,known as a convergence problems,it is dead.Tv have colors lines R,G,B mis alignments,have colors shadow pictures or 3D picture look alike?Yes.The tv convergence board it is dead.The tv convergence board must require replacing 2 STK convergence ICS and some or all of it resistors too.Fixed the tv convergence board to solved the tv convergence picture problems.The tvs shops will cost u like $300-350 for parts and labors.

May 25, 2011 | Samsung HC-P4363W 43 in. TV/DVD Combo

1 Answer

Images show double images like shadows

Ur tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts,must be replaced on the tv convergence board to fix the tv convergence board to solved the tv picture convergence problems.Try website like to buy a whole convergence board for the replacement,might still have it.The DLP tvs AKAI and Samsung tvs used the same convergence board.Or the shop,will cost u like 300-350 for parts and labors.

Dec 17, 2010 | Samsung HCM5525W 55" Rear Projection...

1 Answer

I can not adjust the convergance with the remote or TV buttons

Ur convergence is dead.Must change the convergence board.Buy the whole refurbish convergence at Tv repair for the replacement.The Samsung/Akai use the same convergence boards.

Mar 23, 2010 | Samsung PCJ522R 52" Rear Projection...

1 Answer


Ur convergence is dead,must know how to solders?Buy convergence kit,to replaced parts.Tries these websites for convergence kit.Tv repair,Tv Repair Kits.

Dec 11, 2009 | Samsung HC-P4363W 43 in. TV/DVD Combo

2 Answers

Now What???

I want to get this straight are you saying that you cant align them
and this is your focus problem or you have two problems that you cant get the convergence and the focus?

it might have been easier just to have the board replaced...
Samsung parts for convergance problem

Jan 28, 2008 | Samsung HC-P4752W 47" Rear Projection...

2 Answers


Look for bad pico fuse feeding B+ to convergence amps,two are
hiding under the heatsink amps are on, more fuses in power supply ...............................What part # did you use and what price / mfr. ?.............................T

please verify your model number on back of your tv..........T.

Nov 30, 2007 | Samsung PCL5415R TV

1 Answer

Color problem/ convergence menu help
Sony Convergence

Nov 08, 2007 | Samsung HC-P4363W 43 in. TV/DVD Combo

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Power Color Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Power Color Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides