Question about Digital Leisure DANCE EJAY for PC

3 Answers

Hi, I'm Vista user, and trying to run dance ejay 7 on that, but whatever I do, the ASPI error comes up. please help to come over thos problem. tnx.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Right click on the program name in your start menu and go to properties, then click the compatability tab and set it to run in compatibility for windows xp and also at the bottom click run as administrator.

Posted on Sep 15, 2009

  • josinana Aug 27, 2010

    Brilliant! Thank you :)

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I dont know wwhy this works.. but it does for me...
rclick/copy the program exe, then rclick edit the program exe and do paste. This is the only way i can get the app to open. I get a critical stop on loadup, i can alt+tab and flip to the stop error (a winaspi one) close that error, and a couple more just like it after that. then the program opens and runs fine.

Posted on Jan 17, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

Hello, I am PCHELPSTER007 from YouTube. I have this program and have the solution: Your (.2) file is corrupt which means you have to re-install the second file, then... If it doesn't work then re-install both of the files: 1 and 2. If later you get a question asking for a disk 3 then it means you have not done the above. however, once you have done that and it installs you may get a TAGES error (international CD/DVD protection) if so install the following tages driver for your specific computer and restart the setup.

Tages driver: http://www.tagesprotection.com/main.htm

( if you do not get the straight link with the two files then click on drivers and download it manually)

Posted on Jun 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell Vostro 3500 running Windows 7. Trying to log into the admin (only) account and get the message: The User Profile Service service failed the logon. User profile cannot be loaded. No Recovery Media was...


Please check following link from Mocrosoft knowledge base:

Error message: "The User Profile Service failed the logon. User profile cannot be loaded", when logging on to Windows 7 or Windows Vista

http://support.microsoft.com/kb/947215

PS: If it helps then please click on thumbs up.If you need more help then please let me know.

Sep 20, 2011 | Computers & Internet

1 Answer

Why hiphop ejay 6 is not working in windows 7


Hi.

Just accept that it is not running.

Windows 7 is new and will not support Ejay ver 6.

Feb 27, 2011 | Computers & Internet

1 Answer

I have vistahome premium and when i lunch my ejay 7 i get this error !unable to initialize ASPI manager


Hi,

This is old software which is only supported upto XP, but try the following....

1) Right Click on Icon, and select 'Run as Administrator'

or

2) Install a Virtual XP Machine and run it that way, not ideal, but will get your software working....

Regards

Steve

Nov 28, 2010 | Digital Leisure DANCE EJAY for PC

1 Answer

I need help please!!! i've just installed dance ejay 7 on my netbook, i have an eMachines model eM250 from ACER with all drivers installed and up to date including direct x 9.0c installed and when i try to...


Dance ejay 7, System Requirements:
Pentium® 3, 800 MHz or higher. Windows® 98, ME, 2000, XP,Vista
512mb RAM.
1.4 GB free hard disk space.
4 x CD-ROM.
CD-Writer (for Audio CD Burning feature).
32 MB DirectX® 9.0 compatible Graphics Card (16bit colour, 1024 x 768, 32 MB).
DirectX® 9.0c (included on CD)
compatible sound card (16 bit).
Web browser.

Change your screen resolution to 1024x768 and try to run the the program.

Oct 23, 2010 | Digital Leisure DANCE EJAY for PC

1 Answer

Vaio cr363 dvd writimg problem.


Installing a working ASPI layer
For years people have had various problems with the so called ASPI layer, which is required by many Windows CD-R software’s. This article aims to successfully install a good and working ASPI setup.


What is ASPI?
aspicheck.gifThe term "ASPI" stands for Advanced SCSI Programming Interface. It’s a universal driver layer that operates in between software and the CD-R hardware. It is often referred as 'ASPI layer', ‘ASPI driver’, 'ASPI Interface', which are all synonymous terms for the same thing. Windows 95/98/ME ships with a poorly implemented ASPI layer, while NT/2000/XP has no ASPI layer built in. You can check your current ASPI setup by using the ASPICHK tool that comes with the Adaptec ASPI distribution.

Many software titles install their own drivers to the operating system and therefore do not need an ASPI layer. Such software titles include CloneCD, DiscJugger, GEAR, BlindWrite and many others. On the other hand there is a large number of software that require an ASPI driver installed: Exact Audio Copy, Feurio!, BurnAtOnce, CD-R Indetifier, and so on. Nero Burning ROM comes with it’s own ASPI layer that other software can utilize too.


The symptoms of ASPI related problems
Problems that may occur if there is no proper ASPI setup:

-The CD/DVD devices are not detected by the software
-The CD/DVD devices don’t operate correctly with some program

There are also some reports on the Internet of the ASPI layer affecting the performance of a program (like audio ripping quality) but they have not been properly verified.


Solution 1: Get the latest Adaptec ASPI layer
adaptec.gifSince the version Adaptec has been offering their drives freely for public. Their drivers should operate in any Windows version, including XP. There are however various reports of problems with these drivers. I tested Adaptec’s ASPI 4.72a2 in my computer, but programs utilizing it recognized only my SCSI connected CD drives - the IDE devices were not detected.

Download latest Adaptec ASPI

After downloading the EXE file, run it. The program asks for a destination folder, and unzips the contents there. Use, for example, C:\ASPI\ for the folder.

Next open the C:\ASPI\ folder using the Windows Explorer. Run aspichk (or aspichk.exe) and you will see if Adaptec ASPI verification can find ASPI drivers on your computer. If it says "ASPI is properly installed and fully operational" your ASPI drivers should be OK. If on the other hand it says "ERROR: ASPI is not properly installed", you need to install ASPI drivers.

To (re)install the Adaptec ASPI drivers, run aspiinst (or aspiinst.exe) and click Install. After the installation you should restart Windows, and run aspichk. You should then see the different ASPI driver versions listed, and the box at the bottom should read "ASPI is properly installed and fully operational".


Solution 2: Get the Nero ASPI by Ahead Software
acf2836.jpgAhead software also offers their ASPI layers free. They also promise support for USB/FireWire devices. Most programs should operate with Ahead’s ASPI, and there are many positive reports about the performance of this driver.

We on the other hand had a slight issue with Ahead ASPI. The Feurio! audio CD recording software wasn’t always able to lock the CD-R drive during the burning process.

Download latest Nero ASPI


Solution 3: ForceASPI
ForceASPI is based on older Adaptec ASPI 4.60(1021) version. This version of Adaptec ASPI refuses to install if there are no Adaptec products installed on the computer (Software or hardware), but the ForceASPI package solves this issue by inserting the drivers to the operating system with it’s own installer script.

Get ForceASPI

Adaptec ASPI doesn’t promise Windows 2000 or XP compliancy for the driver version 4.60, but public experience is that they work very well, even in Windows XP. On our test bench computer the ForceASPI was the best solution as an ASPI driver. It works flawlessly in every program tested.

Feb 03, 2010 | Computers & Internet

2 Answers

Photoshop 7.0 installation fails with the error message: "An error occurred during the move data process : -106" Upon install process it makes it to about 1% then gives the following error code....


one problem that could cause this error is lack of administrator rights,

right button click the setup.exe or whatever it called and select run as administrator,

Or if it's Vista try the compatiblity help , right button click the app, select properties and select run as XP service pack2 etc

Regards
gewiz.co.uk

Nov 30, 2009 | Computers & Internet

1 Answer

Problem with ASPI manager


try to download aspi manager from here:
http://discinfo.rpc1.org/

also it is important to download winmount or daemon tools, they have ASPI implemented

Jul 17, 2009 | Intervideo WinDVD 5 for PC

1 Answer

Microsoft works 9 wont open files


A lot of Vista users have run into this problem. From what I can tell...you need to do a system restore.
One suggestion was to change the default printer(?).
Another was to use Open Office, which is free.
Sorry, not a Vista user, wised up after a month.

Jul 13, 2009 | Microsoft Works 9 for PC

1 Answer

MP3 NW-A1000


if the new laptop is running vista, then there is the problem. Vista is plagued with all sorts of user permission bugs. its seems that you need above admin permissions to do the most normal of things. bad software design from microsoft! vista is like going out with a super model, all singing, all dancing, looks fantastic, but after a while you realise she just a pain in the bum!

so...try right clicking the icon you are trying to launch and select "run as administrator" if the software does not run then there are two ways to cure this... the very quick way, but the problem may come back in the future with other software, or the long way, which will defo stop the issue and it ever coming back again!
the long one we will leave if the short fix does not work, so if that is the case and the short solution does not work then come back to me and i will give you instructions on how to change your user rights in vista. (this whole prob comes down to the user rights your login has been given) but we shall cross that bridge if we need to as it can be indepth.
if however you know how to change the user rights on account in vista then thats the solution, change your account to an 'administrator' in users on the laptop.

however, however... the very fast solution is this download this and install and hey presto your mp3 player and your pc are connected!

hope this helps! if not come back to me and i shall help further!!

dont forget to rate me! (if this helped that is!)

Feb 03, 2009 | Sony NW-A1000 MP3 Player

Not finding what you are looking for?
Digital Leisure DANCE EJAY for PC Logo

7,190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digital Leisure Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Digital Leisure Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...