Question about HP LaserJet 2550L Printer

1 Answer

My 2550L stopped printing.

I thought it was because I was low on black toner, and replaced it. The the yellow toner light came on. I was skeptical, but replaced it too. Now the printer is telling me to replace the magenta toner. I know that's OK because I just replaced it a little while ago. Any suggestions?

Posted by on

  • 1 more comment 
  • Kjmaris Nov 05, 2007

    I also now notice that the "Laser Jet toolbox" no longer opens, giving me only a "page cannot be displayed" notice.

  • chassielace Mar 20, 2008

    I have the 2500n and I have the yellow light flashing too. I have not replaced any cartridges yet.

  • Anonymous Sep 03, 2008

    Can't locate my manual to tell what the problem is. Green light is on the horseshoe symble. It is a steady light and not blinking. . . Help



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Take it out and then put it back in.

Posted on Sep 03, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

HP Color LaserJet 2550L. Missing colors

The main circuit board is faulty and needs to be replaced.

Feb 27, 2014 | HP LaserJet 2550L Printer

3 Answers

Konika Minolta 2430 DL won't let me print

Look through the menus on the printer for a setting for "Low Toner" -- the choices of what to do are usually either "continue" or "stop" or something similar (my 2430DL has this option setting) -- set this option to "Continue".
My 15 year old HPs also have a similar setting. However, this will keep it printing when the black runs out, so you will need to check your print production run visually as you go along to make sure the quality is what you need

Jun 22, 2009 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

HP 2550L printer

Theblack print cartridge is empty or missing. The black-print-cartridgelight is blinking, and then printer stops printing. An error 40208 iswritten to the event log. The printer cannot detect the print cartridgecorrectly. Action
  1. Reinsert or replace the print cartridge.
  2. If the print-cartridge light is still blinking but the Attention light is not on, turn the printer off, and then back on.
  3. If the problem continues, contact HP Customer Care at or see the flyer that came in the printer box for other contact information.

Mar 24, 2009 | HP LaserJet 2550L Printer

1 Answer

HP 2550L says toner is low when it isn't

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 05, 2009 | HP LaserJet 2550L Printer

1 Answer

HP color laser 2550L prints only in yellow

Hi Mmgrafde,

Press the Go and Rotate Carousel buttons simultaneously. This will calibrate the printer. See if this works.

Otherwise....Remove all cartridges and drum. Switch off printer. Close the lid. Switch on printer and wait until any churning stops. Insert the drum and close the lid. Wait until any churning stops. Put in one cartridge at a time, closing the lid and wait till it stops churning each time. With the last cartridge put in, it will churning longer (calibrating). Try to print from your computer.

It could also be that the toner could actually have run out for the other colors.


Jan 01, 2009 | HP Color LaserJet 2600n Printer

1 Answer

HP color laser 2550l prints only yellow

Are you sure that none of the other colours are empty? If they are then this could be the problem

Jan 01, 2009 | HP Color LaserJet 2600n Printer

1 Answer

HP 2550L low yellow toner -- can i still print just black???

Unfortunately if one colour is out, then you cant print. These cartridges contain a chip and once depleted will not print until a new cartridges is installed

Dec 12, 2008 | HP LaserJet 2550L Printer

1 Answer

My Hp LaserJet 2600n stop black stop printig

the problem is cyan and yellow toner are low, u will change the cyan and yellow it will be cleared otherwise the will be empty u can't print any thing suppose one will empty other cartridge will not work

Aug 26, 2008 | HP Color LaserJet 2600n Printer

1 Answer

HP Laser Jet 2550l

When moving/storing Laser printers, its suggested that you remove all Toner Carts prior to the unit being moved. The Toner "Dust" (If you will) will settle in the bottom of each cartridge, and become compact. (When LJ's are used on a normal basis, the toner is tumbled around like clothes in a dryer).

Sometimes just turning (Shaking?) your toner carts will help the toner flow better in the drum.

I hope this helps you a little.

Jun 26, 2008 | HP LaserJet 2550L Printer

Not finding what you are looking for?
HP LaserJet 2550L Printer Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides