Why phone and answer machine say I have message when I do not

Search Results

Recovering deleted messages from a digital answering machine ...

www.technibble.com > Forums > Other Discussions > General Chat
Dec 9, 2013 - Recovering deleted messages from a digital answering machine ..... AT&T cordless phones - I don't know how similar that would be to Uniden.

How to retrieve deleted messages from digital answering machines ...

forums.verizon.com > ... > Home Phone (Landline or Digital Voice)
Mar 16, 2015 - I have to say, though, I doubt you'll be able to recover the messages. Digital answering machines typically don't have an un-delete. Good Luck.

How Do I Access Voice Mail? ' magicJack Check

mjcheck.low.li/2013/12/how-do-i-access-voice-mail/
Dec 14, 2013 - Delay needs to be at least 30 seconds because voicemail takes just over 30 ... If you don't know your four-digit pin, it's possible you haven't ...

What model Radio Shack 5.8GHz phone/answering machine?

Without know what voice mail system you are talking about you cannot be helped.

Perhaps your answering machine needs to be set set to accept messages. Maybe your message machine memory is full of messages?

This happens when the number of rings to answer of the provider voicemail is less than the number of rings to answer that the answer machine is set for. For example: if your provider voicemail rings to answer is set for 3 rings and the answer machine is set for 4 rings then the voicemail answers before the 4th ring, therefore the answer machine will never get a message. I would call the service provider's customer service number and request they increase the rings to answer above the number of rings to answer that the answer machine is set for. If you don't want voicemail to answer any calls(when your line is busy or when the answer machine is turned off) ask your service provider to disable voicemail.

Had a problem on wireless home phone with answering machine not taking messages when had the answering machine set to 12 rings before answering. Found the sim card (my wireless system) auto response would answer first. Fixed it by reducing time to 6 rings and answering machine now comes on first.

It may be similar to the problem I had on wireless home phone with answering machine not taking messages when had the answering machine set to 12 rings before answering. Found the sim card (my wireless system) auto response would answer first. Fixed it by reducing time to 6 rings and answering machine now comes on first.

Messagebank provides a personal answering service if your phone line is busy or you can't get to the phone. You don't need extra equipment like answering machines, and you also get greater flexibility on call waiting- if you don't want to interrupt your call, let messagebank take your message. Let me know if this answers your question. Master FixYa: [email protected]



I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

I phoned in from another phone and retrieved my messages. The problem was not with the answering machine but with the phone and calling card I had been using. Don't use a hotel switch board nor calling card, too many intermediate parties for the 2 digit code to work with.

Remotely Operating Your Answering Machine

Call your telephone number and wait for the answering machine to answer. If the answering machine is off, it will answer after about 10 rings and series of beeping sounds.
During the greeting message (or a series of beeps when the answering machine is off), press [0] and enter your PIN code within 2 seconds (see "Setting a Security Code or Personal Identification Number (PIN)" on page 54).
The answering machine announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero." You will hear a beep.
Enter a remote command within 15 seconds, each command there after must be entered within 2 seconds.