Question about IBM ThinkPad X61 Tablet PC

2 Answers

I lost my admin password for bios setup

I need 2 format the computer but the keyboard i aav uses usb. so i need 2 config it but in my configuration setup, my access is blocked. so i need the admin password in order 2 format, etc........

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

You can clear the bios password by removing the CMOS battery from the motherboard, make sure the PC is disconnected from any other power source, wait a good 3 - 5 minutes, hit the power button a few times to make sure all power is drained from the capacitors, and then replace the CMOS battery. You can then power on the PC and the bios password will be removed.

Posted on Jun 25, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a tp x61 try to change my password to something else now i cant get in it have a rest phasre under where i sign at

Posted on Feb 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Forgot My Pin Number. how do retrieve it .


Hola Sorry to say but if this is the right one i searched for the manual found
http://download.lenovo.com/UserFiles/UserGuide/en/User's%20guides%20and%20manuals/K1/Lenovo%20IdeaPad%20Tablet%20K1%20Hardware%20Maintenance%20Manual.pdf
IT said as following:

As many as two passwords may be needed for any Lenovo IdeaPad computer: the power-on password (POP) and the supervisor password (SVP). If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered.

Exception: If only an SVP is installed, the password prompt does not appear when the operating system is booted.

Power-on password

A power-on password (POP) protects the system from being powered on by an unauthorized person. The password must be entered before an operating system can be booted.

Supervisor password

A supervisor password (SVP) protects the system information stored in the BIOS Setup Utility. The user must enter the SVP in order to get access to the BIOS Setup Utility and change the system configuration.

Attention: If the SVP has been forgotten and cannot be made available to the servicer, there is no service procedure to reset the password. The system board must be replaced for a scheduled fee.



Sorry hope this helps a little good luck

May 10, 2013 | Lenovo IdeaPad Tablet K1

4 Answers

Cannot access windows forgot password. I have an old work tablet and forgot my password for windows so I can get to my homescreen. Help


try this link:



http://www.fixya.com/support/r5393255-windows_password_recovery



If you have lost windows password, the best thing for you is creating a password reset disk.Actually,when you add a password to your pc,the first thing you should do is creating a disk in case you lost the password.But how to make a password reset disk after you have lost the password ? Follow these
You need to prepare:
1:A blank CD/DVD or USB flash drive
2.A computer which can link to internet
3.A program called Windows Password Key
Then let's begin
Step 1.Login to a PC which can link to internet,Download and install the program from in that PC
Step 2.Run the program and burn to CD/DVD OR USB flash drive
Step 3.Turn to your locked PC,insert the newly create CD or USB to your drive.Reboot the Computer and then follow the instructions,it is very easy to use.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Lost user password in XP with networking set-up on HP

The best way to do this is using the Offline NT Password & Registry editor.
You can download it at the following link: http://pogostick.net/~pnh/ntpasswd/

This utility will enable you to reset the password of any user that has a valid (local) account on your Windows NT/2k/XP/Vista etc. system.
The link above includes some directions on how to use this utility.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Nov 17, 2010 | Fujitsu Stylistic ST4120P Tablet PC

1 Answer

TO REMOVE PASSWORD OF THE BIOS


This information is intended for experienced users. It is not intended for basic users, hackers, or computer thieves. Please do not try any of following procedures if you are not familiar with computer hardware. I'll not be responsible for the use or misuse of this information, including personal injury, loss of data or hardware damage. So use it at your own risk.

A. By Using the Motherboard Jumper:

In most motherboards CMOS battery is soldered, which makes it difficult to remove the battery. In this case we use another method.

Almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper varies depending upon the motherboard brand. You should read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc.

When you find the jumper, look carefully. There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to do, is remove the jumper and join the center pin to the opposite pin. e.g. if the jumper joins center pin to left pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin.

Make sure to turn the PC off before opening the cabinet and resetting the jumper.



B. By Using Software:


I have found that BIOS/CMOS Password Recovery Tool is the most effective.:
BIOS/CMOS Password Recovery Tool is a program that works instantly to remove any lost or forgotten BIOS/CMOS password. Simply boot your PC to DOS and execute the program, and get access to forgotten BIOS/CMOS passwords in just seconds

BIOS/CMOS Password Recovery Tool Service: http://www.biospasswordrecovery.com/

Jan 30, 2010 | Fujitsu Stylistic ST4120P Tablet PC

1 Answer

Lifebook P1510 not booting from recovery CD off external CDROM dr


you'll have to use a password recovery tool for windows.
Try www.password-changer.com and http://home.eunet.no/pnordahl/ntpasswd/.

Oct 30, 2009 | Fujitsu LifeBook P1510 Tablet PC

1 Answer

I lost my admin password for bios setup in lenovo x61 tablet


chk this link

http://www.tech-faq.com/reset-bios-password.shtml

or

most awesome answer is here

http://www.ja.olm.net/unlock/

Mar 30, 2009 | IBM ThinkPad X61 Tablet PC

5 Answers

Forgot password -samsung q1 ultra


Have You Lost Your Windows Admin Password?

Forgetting your Windows administrator login password. With no way to get into the system, you can’t even perform basic maintenance, let alone a thorough tune-up. Formatting is always an option, but we consider that a last resort. (Plus, guess who’s going to have to help reinstall all the programs lost after a wipe?) But all hope is not lost. There are a few ways to actually retrieve a lost Windows account password. Read on, and we’ll show you the light.

1st Method:
The first thing which you check if you forget login password. When we install Windows, it automatically creates an account "Administrator" and sets its password to blank. So if you have forget your user account password then try this:
Start system and when you see Windows Welcome screen / Login screen, press <ctrl>+<alt>+<del> keys twice and it'll show Classic Login box. Now type "Administrator" (without quotes) in Username and leave Password field blank. Now press Enter and you should be able to log in Windows.
Now you can reset your account password from "Control Panel -> User Accounts".
Same thing can be done using Safe Mode. In Safe Mode Windows will show this in-built Administrator account in Login screen.

2th Method:
There are a lot of Windows password revealers and crackers available, but we’ve found that Windows Password Recovery Tool is the most effective.:
Windows Password Recovery Tool is one of the easiest password recovery tools to use. It allows you to reset a user account password, including the Administrator password. It is also a relatively small download.
Windows Password Recovery Tool Service: http://www.windowspasswordsrecovery.com

Jan 01, 2009 | Samsung Q1 Ultra Tablet PC

2 Answers

Bios setup password


Hi!! Usually DELL Latitude or Inspiron passwords are storedi n eeprom memories that has to be read or writen to remove / bypass the BIOS password!!! Password generate a hash code that will appear after 3 wrong password attempts and it has a 5 digit decimal format "xxxxx" You can get the hash code by pressing F2 or F10 when you turn on the laptop to enter Bios and then when password prompt appears hit F12 to get the hash code.


You can generate a unlock code or master password with the service tag "xxxxxxx" 7 digit, this code appears at the password promtp screen or at the bottom of the laptop with a white sticker.


I got Latitude D620 Bios password Unlocked at http://www.laptoprebirth.com They can calculate a master password with the hash code. Hope it helps

Oct 27, 2008 | Panasonic TOUGHBOOK CF-18 Tablet PC

1 Answer

Installing windows without DVD


The hard disk is not recognized from USB because of SATA drivers not present on XP setup disk.

That happens because the BIOS uses a SATA controller that is not included in Windows XP install disk.

Usually you can solve the problem going to BIOS settings and changing SATA/RAID settings.Check your BIOS settings, and disable SATA RAID mode.This is done in different ways depending on the BIOS.

On HP/Compaq computers for example you press F2 on startup to enter BIOS, then disable SATA mode on bios settings.
On other makes the procedure can be slightly different.


Another way to fix the problem, is by creating your own XP setup disk with SATA drivers included, see:
Resolving "Setup did not find any hard disk drives" during Windows .

Mar 17, 2008 | Toshiba Portege M205-S810 Tablet PC

1 Answer

Loading Windows 2000 on a formated hard drive


Try detecting cd rom in bios and boot from Cd rom. and then istall windows.

If not you should have drivers in floppy during installation it will ask for drivers F6 [function key]
Best Regards
rafique

Feb 18, 2008 | Fujitsu Stylistic LT C-500 Tablet PC

Not finding what you are looking for?
IBM ThinkPad X61 Tablet PC Logo

Related Topics:

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Tablets & eReaders Experts

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an IBM Tablet and eReader Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...