Question about Office Equipment & Supplies
I need to ship a Savin 4035 copier that is already in service. I need to know what steps must be taken to secure the inner workings to prevent damage in transit. I don't have a service manual.
The main thing you need to do, is to remove the toner bottle assembly, drum unit and developer unit. There is a small black stopper you'll see once you pull out the toner bottle unit. Remove the stopper and the tray holding the bottle will slide out of the machine. The drum unit has a thumb latch on top of the unit and all you have to do is open the right side door, release the lever and remove the drum unit. DO NOT TOUCH THE DRUM! The developer unit is below the drum unit. There is one screw holding a silver piece of metal which secures the unit in place. Loose the screw and fold it down to the left and then remove the developer unit. These steps will keep toner and developer from spilling out into the machine. Good luck.
Posted on Jun 26, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 28, 2014 | Savin 2575 Black and White Copier
Sep 12, 2013 | Savin Copier Supplies; Toner for...
Dec 19, 2012 | Savin Office Equipment & Supplies
Jul 06, 2010 | Gestetner DSm645 Digital Imaging System
May 21, 2010 | Kyocera Mita KM-4035 Printer
Dec 02, 2009 | Savin Office Equipment & Supplies
May 04, 2009 | Office Equipment & Supplies
69 people viewed this question
Usually answered in minutes!