Question about Edimax BR-6104K Router (br6104k)

2 Answers

Edimax BR-6104K Router Problem:

Please help me with this..

i have just configured my router and have set-up an internet connection to my 2 PC's, but after some hours, after turning off everything, when i try to browse i can't have a connection to the net. The first solution that I've thought of is to configure everything all over again, resetting and retyping everything, but after sometime i found it tiring remembering all the IP address, Default Gateway and DNS. I always encounter this problem. I think the problem is neither with the router nor the modem. Can someone please help me with this? What must i do with the PC everytime I'll turn it on?

Thanks! :D

Posted by on

  • owyzzz11 Mar 02, 2008

    i've figured it out brothers!

    @quickSETUP
    choose your timezone
    then either choose
    Cable Modem












    Host Name :





    MAC Address :
    click clone MAC address

    or

    Fixed-IP xDSL


    Enter the IP Address, Subnet Mask, Gateway IP Address and DNS IP Address provided to you by your ISP in the appropriate fields.












    IP address assigned by your Service Provider :







    Subnet Mask :








    DNS Address :








    Service Provider Gateway Address :














































































    ***note: DNS can be acquired through your server..
    as of mine i got it from PLDT, here in Philippines..

    this has what happened to the GENERAL SETUP:
    LAN Settings


    You can enable the
    Broadband router's DHCP server to dynamically allocate IP Addresses to
    your LAN client PCs. The broadband router must have an IP Address for
    the Local Area Network.









    LAN IP



    IP Address :




    IP Subnet Mask :




    802.1d Spanning Tree :

    Disabled
    Enabled




    DHCP Server :

    Disabled
    Enabled














    Lease Time :



    for(i=0;i"+timeName[i]+"");
    else
    document.write(""+timeName[i]+"");
    }

    Half hour
    One hour
    Two hours
    Half Day
    One Day
    Two Days
    One Week
    Two Weeks
    Forever





    DHCP Server



    Start IP :




    End IP :





    Domain Name :




    dhcpChange(document.tcpip.dhcp.selectedIndex);






    i hope i could help!thanks for those who attempted to help

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I have the same case on owyzzz. i am using admin password...

Posted on Mar 01, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

What type of modem do you have ie is it dsl using a username and password or a cable modem.
they are 2 different setups
cany you post an update here

Posted on Nov 08, 2007

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 57 Answers

SOURCE: how connect the edimax BR-6104K router using the PPPoE connection

Let's see if this things work..

First open the internet explorer browser. On the Address bar, type 192.168.2.1.

The site will ask you for username and password. The default username is admin and password is 1234.

The edimax page will appear, click the quick setup wizard.
just follow the instructions. The site will ask of your broadband type; click the PPPoE x DSL and fill up the required information.

Type your Username, Password, and Service Name and other info.

That's It!

Hope this one helps you...

Posted on Dec 29, 2007

  • 116 Answers

SOURCE: Asks for IP address and password

Try reading the Quick Installationguide and see of that helps.
 
http://www.edimax.com/images/Image/QIG/Wireless/BR-6204Wg/BR-XXXX_QIG.zip

Posted on Jan 09, 2009

  • 1 Answer

SOURCE: Edimax Router BR-6140K Self-restart Problem

It's broken. Buy anothe one!

Posted on Jun 05, 2009

  • 1 Answer

SOURCE: how to configure edimax router BR-6104K

How to configure edimax router BR-6104K Problem with the Edimax BR-6104K Router

Posted on Jun 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to configure edimax router BR-6104K


How to configure edimax router BR-6104K Problem with the Edimax BR-6104K Router

Jan 19, 2011 | Edimax BR-6104K Router (br6104k)

1 Answer

Dhcp disabled


Hello,

I'm not too sure how you are trying to access the router (wired or wireless) or what operating system you are using, but you will need to manually set your IP address (through Network Properties) on the computer to 192.168.2.10 (for example) with subnet mask of 255.255.255.0.
If you also want internet access you will need to set the Gateway and DNS to 192.168.2.1.


Once that is set you will be able to try bring the page http://192.168.2.1 again and configure the router from there.

Once you configure the router (i assume you want to turn on DHCP again) you can set your computer back to DHCP assigned IP and DNS.

Dec 15, 2008 | Edimax BR-6104K Router (br6104k)

1 Answer

PPPoE over Edimax BR-6104K without a modem


I am not sure if I understand you well.

You say:
My Internet is a PPPoE broadband connection but I don't have a modem installed.

What do you mean ?
You have a Broadband/ADSL modem, but you didn't install any software for it ?
(It is probably not necessary.)

So, I assume you do have a modem. You connect your modem to the wall outlet with a telephone cable.
Then then modem is connected with LAN cable to one of your PC with two NICs, you make Internet Connection Sharing, and ten from the second NIC of that PC, you connect (again) with LAN cable, your second PC.

If it is an ADSL or Cable modem connected with LAN cable, please follow this steps.

First RESET your Edimax router and disconnect all LAN cables if connected.

Connect your PC (the one with one NIC) to one of the 4 LAN ports of your Router wit a LAN cable.

Open My Network Places and then View network connections, or go to Control Panel and open Network Connections.

Right-Click on your LAN adapter and choose Properties, then double-click on Internet Protocol (TCP/IP)

Set to 'Obtain IP address automatically' and 'Obtain DNS server addres automatically' (click OK). Now you are back to the previous window. Click and check (if it is not) 'Show icon notification when connected' and once again click OK.

After a fiew seconds you should get (near to the clock in the the right bottom of your desktop), a Network icon and a baloon message that your NIC is connected.

Right-click on the network icon and click STATUS, a window will open
and then click on SUPPORT tab.
You should see:
IP Addres: 192.168.2.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1

Open your browser and type http://192.168.2.1

Now login as:
admin (default)
and password is: 1234 (default)

Click on GENERAL SETUP on Top-Left, and then on WAN (on the right side) and choose
PPPoE.
Click on 'More configuration'
Type your User Name and Password you have from your ISP.

Now Click on APLY, and again APLY !

The Router will restart in 30 Sec, and your NIC will reconnect.

Now connect your Modem to a WAN port of your Router with LAN cable. (***)

Now:
if you've typed your User Name and Password correctly in PPPoE fields,
and
if everything is OK with the service from your provider,

you should now be on Internet.

If not, then please check your User Name and Password with your Internet Service Provider, and ask them if they can see your router.

Now, get to the PC with two NICs.

Go to Control Pannel, and go to Network Connections.
Right-click on one of your NICs and click 'Disable'.
Check the other NIC if 'Internet Protocol (TCP/IP)' settings are set to Obtain IP addres and DNS - Automatically, and 'Show icon notification when connected' and once again click OK.

Connect the (enabled) NIC with LAN cable to another port of your router.

The second PC should be on Internet, too.


If you (somehow) realy don't have a modem, but you have a cable only, follow the above instructions to the point (***) and connect the cable to the WAN port of your router.

That's it!

Regards

Aug 28, 2008 | Edimax BR-6104K Router (br6104k)

1 Answer

Configuring


hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router and repeat the same steps.

note:

configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username (email address format) and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

if you are still having trouble configuring your device, try to call supportrix

Jul 10, 2008 | Edimax BR-6104K Router (br6104k)

1 Answer

Edimax wireless-g broadband router


please confirm if the router is a 6104K, or a KP or Wg or another model as the K and KP are not wireless, a "W" will denote wireless capability...

Not all manuals are available for download from the Edimax website but heres a start...

Connect the router to your PC with a cable... leave the modem disconnected to start with

open internet explorer and type in enter the default IP address 192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press <enter>

This should bring up a user/password dialog box. By default the user name is "admin" and the password is "1234".

Confirm you are getting this far and we'll go the next steps


Jul 06, 2008 | Edimax BR-6104K Router (br6104k)

1 Answer

How to config my edimax 6104k router???


1You can run the setup CD or manually configure it using the user interface of the router.
2.Since that is a router all devices that will be wired to it should automatically get an IP address from it.
3.Since they will be connected to the router you just need to enable file sharing on each computer.

May 07, 2008 | Edimax BR-6104K Router (br6104k)

1 Answer

Edimax br-6104k


well, it just works now! :-) i can access the config page. idon't have a logical explanation.:-P

Apr 21, 2008 | Edimax BR-6104K Router (br6104k)

2 Answers

Edimax br-6104k


do you have apppoe connection or dhcp? release your ip address (ipconfig/release) set your modem to bridge mode then connect modem and router. try to connect.

marlon

Jan 16, 2008 | Edimax BR-6104K Router (br6104k)

3 Answers

How connect the edimax BR-6104K router using the PPPoE connection


Let's see if this things work..

First open the internet explorer browser. On the Address bar, type 192.168.2.1.

The site will ask you for username and password. The default username is admin and password is 1234.

The edimax page will appear, click the quick setup wizard.
just follow the instructions. The site will ask of your broadband type; click the PPPoE x DSL and fill up the required information.

Type your Username, Password, and Service Name and other info.

That's It!

Hope this one helps you...

Dec 28, 2007 | Edimax BR-6104K Router (br6104k)

4 Answers

PPPoE over Edimax BR-6104K without a modem


HI,
  Actually in short  "you NEED A MODEM;"
In order to connect your router you need to connect a modem in "bridge mode'( bridge mode is nothing but a configuration on the modem)..

cd8a28a.jpg
this is a picture of  rear side of a  router,,, you have to connect the modem into the wan port of the router (above),, and in port number 1,2,3,4 you can connect your computers,

Nov 01, 2007 | Edimax BR-6104K Router (br6104k)

Not finding what you are looking for?
Edimax BR-6104K Router (br6104k) Logo

648 people viewed this question

Ask a Question

Usually answered in minutes!

Top Edimax Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you an Edimax Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...