Phaser 8560DN Printer ~ Error Message

Sadly, Xerox says that this means "Power off the printer and contact support". Phaser 8560 Support Drivers

However, there is something about "opening the pivot plate", it's Greek to me, but google it and see if you can't reset the brain in the printer and get it back to life without an expensive service call.

Try this link:

http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=34,E=0000000005954708023,K=4248,Sxi=4,Case=obj(2194)

This error indicates in issue with the ink or ink loader. Open the top cover and inspect that the ink inside is not broken, also make sure you are using genuine xerox ink sticks. If this is true you can clear the error
On the Control Panel, press the Down Arrow button to select Troubleshooting, press OK. Now press the Down Arrow button to select Service Tools, press OK. While pressing and holding down the Up Arrow button, press the Down Arrow button to display the Hidden Service Menu. Enter Diagnostics, Go to Function Menu and Clear ISC Fault.
If the error re-occurs after doing all this you should replace the ink loader (part# 133K27771). Here is a video that shows you how to do that. Good luck, and thanks for using Fixya!

my xerox printer phaser 8860 is stop printing. message show, 08,035.42: 138484. Is this fixable

For this type of error 07,007:4x the Xerox website suggest you turn off the printer for 30 seconds, then turn it back on and try to print again. Here's the link to reference page of Xerox support website.

The Xerox website doesn't say exactly what this means, except it indicates that is not a user serviceable issue. You should turn off the printer and contact service centre. Here's the reference page from Xerox support website.

This unit has a common situation that requires parts and 2-3 hours of labor. This error points to a bad process motor 127K53240
These generally go bad with 2 camshafts 020K14800 and 008K02160
Whit
Item, Inc.

The inksticks are probably jammed in the slot. If you're using non-Xerox ink, an error reset is required. Since the non-Xerox ink sticks are not the right shape (since the shape is a registered trademark), they don't always trip the sensors when they come down the chute.

That is a fault in the process drive motor area.
It is the assembly that operates the maintenance kit movement.
You may simply have to reseat the maintenance kit.
The motor drive train may also be mistimed. If you have purchased that machine in the last year, there is a one year onsite warranty on that product. If so have your serial number ready and call 1-800-835-6100.