Question about Siemens Gigaset 4000 Phone

1 Answer

Help with siemens giga set4200

Giga set 4200 answering machine is full cant delete old voice msg's any suggestions

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 106 Answers
Re: help with siemens giga set4200

Hello, it sounds as if your base has gotten corrupt somehow. You can try defaulting it, but keep in mind you will lose all your messages, and will need to re-register your handsets if it works. To do so, get all your handsets together near you base. Unplug the power from your base and turn the base over. Push and hold down the Page/Registration key and keep it held down while you plug the power back in. Keep the key held down for at least 15 seconds, then release and begin registering your handsets. If you need help, I can email you a "cheat sheet" on doing so. You can contact me at Good Luck !

Posted on Jan 11, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I set up voice mail box on gigaset 420

I am done helping sightless ignorance Again, for the last time


If you cannot, Move to California or New York City and worship at the Alter of O'bamma

Nov 17, 2014 | Siemens Gigaset 4200 Cordless Handset &...

2 Answers

I am having problem with leaving messages. Everytime someone try to leave msg..voicemail say your memory is full, please hangup..but there were no messages in there..I also turned the machine off to see if...

Deleting messages (memory may be full).

Verify you do not have old messages on the the system. After the system plays all new messages, press Play/Stop again or from the handset Select 2:Play.If you find messages, delete them during or after they play.

After you listen to your messages, the voice message icon turns off. If it doesn't or if you can not receive messages, you should try to reset it: With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes.

Make sure the Record Time is not set to Announce Only.

Jun 20, 2011 | Uniden DECT 6.0 Cordless Phone

1 Answer

Dialing in to get Voice Messages.

After the answering machine beeps for you to leave a msg - enter the 3-digit security code. If you haven't already set that function up, the default is 1-2-3.

Once in, use these buttons for:

#1 - Review msg
#2 - Play back msg
#2 again to Stop the play back
or #0 to delete during play back
#3 - Skip
#4 - Turn off/on answer
#7 Review voice menu options

Mar 26, 2009 | Uniden Cordless Phone

1 Answer

Set number of rings before answer machine pick up

From the main menu select the Voice Mail option in Voice mail select Ring Delay in Ring Delay you can choose the delay time before Answering Machine pick up the phone from 0 to 30 secend.Reza from Iran

Oct 01, 2008 | Siemens Gigaset S455 Cordless Phone

3 Answers

Problem Siemens Gigaset 4000 and 4200

You did get spiked from the power company, and your system needs repair. Go to for help.

Jun 23, 2008 | Siemens Gigaset 4000 Phone

1 Answer

Voice mail is full do not know how to empty it

Many people confuse voice mail with answering machines. Most of the time if you have voicemail that is provided by your phone company you will hear a stuttered dial tone when you pic up the reciever. If this is what you hear you should call the service provider and they will explain how to retreive your messages and delete the old ones. Are you able to listen to you messages? If you have voice mail, you do not need the answering machine turned on on your phone.

Jan 23, 2008 | Uniden TRU8885-2 Cordless Phone

2 Answers

"new voice mail" display

call your phone service and have them disconnect the voice mail and if they cant just remove that have them set there rings at like 9 since most phones only have up to 5 rings for the machine to will have to use there voice mail service to hear your message and then delete it but should be good after that. i have comcast and they said it would take 3 days to deactivate voice mail but told me how to get there so i can get rid of that flashing light, hope this helps you

Oct 28, 2007 | GE 25942GE2 Cordless Phone System

2 Answers

Answering machine

Unfortunately the 4010 model does not have a built in answering machine but does have features to work with your local telephone companies voice mail. If you want to keep your same phones and get a base with a built in answering machine you will need to replace your 4010 base with a 4015 base (up to three handsets), or a 4215 base (up to four handsets). But don't toss out your old base, you can use it to extend your range if you ever use a 4200 series handset that will allow you to register each handset to up to four seperate bases simultaneously to extend the range. You can buy the 4015 or 4215 base only and save yourself some money. You can google Siemens cordless repair or go to the Siemens website to find a few options.

Aug 12, 2007 | Siemens Gigaset 4010 Cordless Phone

1 Answer

Can't activate answering machine

Here is the manual for almost the identical phone, in English: Pages 18-23 discuss the operation of the answering machine.

Mar 14, 2007 | Siemens Gigaset 2415 Cordless Phone

Not finding what you are looking for?
Siemens Gigaset 4000 Phone Logo

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Phones Experts


Level 3 Expert

94039 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Siemens Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides