Question about Computers & Internet

1 Answer

Fujitsu siemens esprimo mobile v5535 has blank screen. displays on projector but not on lcd. run through Fn + F10 but remains blank. have tried brightness keys as well. Any ideas?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

This answer is probably too late for you but may help others. Just to the left of the right hinge of the laptop is a small plastic lug which presses on a switch when the laptop is closed. That switch switches off the back light of the screen. Dirt can accumulate in the switch so it is permanently stuck in the off position. Clean it out carefully with a toothpick, small brush and finally vacuum it. Once clear of debris, squirt a bit of contact cleaner in (NOT WD40). You can also check to see if the LCD part of the screen is 'dead' by shining a bright torch at it once boot up has completed. You should be able to make out the normal 'enter password / logon' screen (front / side lit instead of backlit). If nothing can be seen the LCD is dead, so we're into new screen territory.

Posted on Mar 19, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oem number p0116


goto fujitsu.com and look into support menu.

Apr 01, 2014 | Fujitsu Siemens Computers & Internet

1 Answer

Grafix drivers for fujitsu siemens v5535


go to http://uk.ts.fujitsu.com/support/downloads.html

Product : Notebook -> ESPRIMO Mobiles -> ESPRIMO Mobile V -> ESPRIMO Mobile V5535

Then Select your Operating sytem to get the drivers for download.


Good Luck

Jan 21, 2011 | Fujitsu Computers & Internet

1 Answer

HOW TO ACTIVATE WIRELESS ON SIEMENS V5535


press the button Fn at the bottom left side and the F1 top and this will switch it on.

Jan 06, 2011 | Fujitsu Siemens ESPRIMO MOBILE V5535...

1 Answer

Hello , everyone and experts people. I have a Fujitsu Siemens Esprimo Mobile V5535. laptop good start, green LED lights up, but i have a black screen without any background applications. I tried to pick...


Hi dejandan1

Sorry to hear you are having problems. The very fact you tried an external monitor shows you have some good IT skills. As long as you know this monitor works it is a good test. As you have no image try toggling the video output signal by using Fn (Function) and the CRD/LCD (Cathode Ray Tube/Liquid Crystal Display) keys or Alt (Alternate) and the CRD/LCD keys.
philswift_7.jpg

If this does not workthen it is either
1. Laptop on board graphics failure
2. Laptop LCD panel failure
3. Laptop inverter failure
4. Laptop backlight failure
Turn on your laptop and look closely at the screen, can you see what you would normally see but very very dark? If so it is the backlight. If you cannot see anything, which is likely, then it is the inverter, actual panle failure or grahipcs chips on the motherboard.
http://www.daileyint.com/hmdpc/lcd.htm


philswift.gif Above is a link and flow chart that will help you.
It is most cost effective to send or take the laptop in for repair. You can replace inverters yourself but there is guarantee it is that. If the graphics on the motherboard has failed then all you can do is have the motherboard replaced. If the laptop is slow and old it may be time to consider a new laptop. If the laptop is under warranty, goto the Fujitsu Siemens website and log a under warranty repair.

All the best, Phil

Dec 06, 2010 | Fujitsu Siemens ESPRIMO P2500 PC Desktop

2 Answers

How do i change my lcd screen on my Fujitsu Siemens Esprimo Mobile V5535


The LCD screen is cracked, that why it is black.
You can a Google search for replacement screens on the Internet, I found LCD Parts resonable for parts, service and DIY info.
Use this link to get to their WEB site :-
www.lcdparts.net

Jun 28, 2009 | Computers & Internet

1 Answer

Assistance replacing Esprimo Mobile screen


get a flat screw driver and start undetaching it from the corner

Mar 05, 2009 | Fujitsu Siemens Computers & Internet

3 Answers

Fujitsu Siemens Esprimo Mobile V5535 -


Use the Fn + F1 keys as long as the wireless switch utility is installed. The manuals and guides for your model are here:

manuals and guides


Please rate my assistance - this should be a fixya.

Mar 21, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...