Overhead light will not go off - Genie Garage Door. SilentMax 1000 3/4 HP Comparable Belt Drive Garage

If this picture at the link shown looks like yours, the red and white cord with the red plastic piece needs to be pulled to disconnect the automatic door opening chain.

http://www.aypapaquerico.info/overhead-door-legacy/overhead-door-legacy-large-size-of-garage-and-modern-overhead-garage-replacement-with-legacy-opener-overhead-door-legacy-496cd-b-manual/

Then, pushing the garage door fully open should move the mechanism back to connect in the ceiling. Then the remote control may work. If not, seek a repair service.

Your instrument cluster light dimmer switch if turned to max, will click on the roof light..Some cars also have overhead light disable sw near light control panel. Also door sw around door where it closes

Page 116 and 117 of the manual explain that there's a two-position slide switch on the map light, DOOR and OFF. The back light has three positions, ON, Door Activated, and OFF.

Pages 116 and 117:
http://techinfo.honda.com/rjanisis/pubs/om/ACC080/ACC0808OM.pdf

Open your car bulet the go to where the overhead light holder hid remove the overhead light panel then remove the burnt bulb then replace with the new one then couple the panel back and close the bulet and here coming the overhead light working.

The dome lamp has a switch that can be put into several positions. "Door" "Off" and "On" If you want the light to come on when you open the door then you must have the switch in the "Door" position.
The "Off" position will only let the dome lamp work when you override it with the dash control and the "On" position will leave the light on at all times - door open or not.

Overhead projector consist a large box with a very bright lamp and a fan to cool it. On top of the box is a large fresnel lens that collimates the light. Above the box is a mirror and lens that focusses and redirects the light forward instead of up.

An overhead projector is a very basic but reliable form of projector. The overhead projector displays images onto a screen or wall. It consists of a large box containing cooling fan and an extremely bright light, with a long arm extended above it. At the end of the arm is a mirror that catches and redirects the light towards the screen.
An overhead projector can be used to enlarge images onto the screen or wall for audiences to view.

my 97 burban has a dome override button next to light switch that does the same things you discribed look for it and push it if you have one its labeled

this is my 3rd brand new apollo 3000 that is not working! What is with this product? Fan works but no light

1. Depress the side tabs and remove the overhead storage bin.
2. Remove the overhead console.
3. Disconnect the 2 overhead console electrical connectors
4. Remove the dome lamp assembly.