Question about Saws

1 Answer

I need a bandsaw blade for a Craftman 3 12 ( vint. 1952 ) with a blade number 9-2664

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,996 Answers

You'll need to find out the length of the blade in inches. If you have an old broken one, you can simply measure it. Then if you search online, you'll find a variety of sources that will weld/braze a custom length blade for you. (link here)
Otherwise, you might find a manual here. that gives the standard length for that machine.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Posted on Jul 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the number i need to order this bladei need a number to order these blades

What's the brand and model of your band saw? I order my blades online @ . Give them a call if you're unsure with what type of bandsaw blade to use, their team is very helpful and knowledgeable.

Jul 08, 2014 | Saws

1 Answer

! have a metal cutting bandsaw from toolmac model 73- 532501 Where can i get spare blades

One question , what happened to your blade? Why do you need spare blades? Oh ,actually,t here are lots of sites that can supply some blades for your bandsaw. Give it a try visiting .

Nov 04, 2012 | Saws

1 Answer

I'm looking for a table top band saw that will cut 4140 and harder steel, what kind of blade and saw would you recommend. ?

i have a great company for you to contact to find the perfect blade for your needs. go to and click on the doall sawing tab and find the customer support phone number. call them during business hours and you can get at blade tech on the phone that will ask you a few questions to what saw you have and what your cutting and they can put you on the perfect blade. i use them for a bandsaw we use at work, we manufacture awnings and signs. i get all my bandsaw blades from Doall

Dec 24, 2010 | Delta BS100 Shopmaster 9 Inch Bench Top...

1 Answer

I am changing the saw blade on 12 inch Craftsman bandsaw

Go to: and enter the complete model number minus the decimal point. This will bring you a series of parts drawings and possibly an owner's manual. Generally, adjustment is provided for the upper wheel only--use hand power to check the tracking performance. Good luck!

Jan 12, 2010 | Saws

1 Answer

Hi i have a craftman bench 10 inch bandsaw that has blade drif

The problem could be one of two things. The tires could be worn or glazed with rosin. Try cleaning the tires with mineral spirits to remove the build-up. The other possibility is that the pulleys are out of alignment. To check this, put a straight edge across the face of the lower pulley and see if squares with the upper pulley, if it doesn't, loosen the set screw on the upper pulley and adjust accordingly

Dec 08, 2009 | Craftsman Saws

1 Answer

Ihave a delta milwaulkee band saw serial number 1643 A need a manual and a year it was made?

If the same lady is working there call 1-800-235-2000. I called several years ago for my Delta/Homelite bandsaw. I gave her the serial number, she told me it was made in 1952. I asked for the guide blocks, she asked for my address, sent them along with a photocopy of the only original manual they had left, for FREE!

Mar 07, 2009 | Saws

Not finding what you are looking for?
Saws Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tom Chichester

Level 3 Expert

45079 Answers

ray gallant

Level 3 Expert

52123 Answers

Are you a Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides