Question about Sharp AR-5320 Black and White Copier

4 Answers

SHARP AR 5012 developer reset

Hi there. I've renewed a SHARP ar 5012 copier, refilled toner, refilled developer, changed drum unit, everything worked fine, but I've got an error message, the toner/developer lamp blinking, and I tried the C exposure C exposure 24 Start 06 Start method, no success...
Whats the problem?

Posted by on

  • Anonymous Mar 18, 2014

    how do I refill the developer for Sharp AR5618

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a sharp sf 1025 , and i want to reset developer conter? can u help me pls

Posted on Jul 17, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 136 Answers

Well first off if you changed the drum Unit you should reset the counter for that as well. And before you do a developer reference make sure your white reference measurement is cleaned that's the white strip underneath the glass. , Are you aware that you are suppose to enter sub-codes. If you need help and r in the Ct area contact us.

http://www.copierspluswwllc.com

Posted on Oct 10, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 92 Answers

U have to do a developer setting white referance setting and reset counters

Posted on Jun 26, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Sharp Expert
  • 255 Answers

Replace the toner cartridge and reset the developer with command 42 sub 01.

Posted on Oct 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My sharp xerox machine AR-5516 is bleaking a man near toner signal point. why is this bleking? Kindly solve my problem.


The blinking man who we refer to as Mr Bill is a "time for maintenance light". Just ignore it, the machine will keep working.

Aug 21, 2011 | Sharp AR-5320 Black and White Copier

3 Answers

My Sharp Copier Model AR-M160 showing f2 error even I replace the new tonner.


Below are the F2 errors and causes for Sharp AR-M160

"F2-31" Image density sensor fault
"F2-32" Drum mark sensor fault
"F2-33" Grid voltage correction problem
"F2-35" Grid voltage correction problem
"F2-37" Drum mark sensor fault

Cause : CRUM chip defect OR Improper developing unit
Check and remedy : As you have already replaced the tonner, we can suggest Replace the CRUM chip,Replace the developing unit

Regards,
Shrey

Jun 01, 2011 | Sharp AR-M160 Laser Printer

1 Answer

I' ve a problem with copier ar 5516. i need information about using of developer. where i must to put the developer? the toner AR-021FT IS COMPATIBLE WITH THIS COPIER?


yes ar021FT toner compatible for your 5516. when replacing the developer:1) pull out the toner cartridge,2) pull out developing unit with 1 screw (blue),3) in developing unit remove 2 screws (blue) to open its top cover,4) drain d unit and replesnish with new developer. do procedure 4 to 1 to return. Good luck.

May 22, 2011 | Sharp AR-5320 Black and White Copier

1 Answer

How do i change/refill the developer on a SHARP AR M257 copier?


open frount cover remove toner cartridge. remove blue screw be carefull dont damage drum.developer unit out ,clean old developer and apply new developer .then re install all of them and input code 25-2 and let the copier to run and stop automaticly.

May 17, 2010 | Sharp AR-M257 Black and White Copier

1 Answer

Sharp AR 235, output light


You have to change the Developer in the developing unit. code is: AR271D
This procedure must be done by a copier tech.

Feb 15, 2010 | Sharp AR-235 Copier

1 Answer

SHARP AR-203 copier unusable after refill


Change the unit chip or reset him.

Sep 01, 2009 | Sharp AL 1631 Copier

2 Answers

Sharp copier ar-bc320 error code??


the DK message means it is time to replace the black drum unit. the drum unit is called an ARC26DU. open the front cover. remove the toner cartridge/s by lifting the green lever and pulling the toner out. Open the left side door. look at where you just pulled out the toner and there is one screw (facing you) holding each drum in place - loosen the screw and pull the drum unit out towards you....slide in the new drum unit.
to reset drum counter go into SIM mode by pressing the following keys one after the other "P" "*" "C" "*" then 24 and start/copy key then 7 then select the color drum you are replacing and confirm reset. make sure copier restarts afterwards

DO NOT refill these toner cartridges (even if you can find someone to do it) The toner cartridges for these machines have generally had ongoing problems as far as longevity and quality - refilling them will only make it worse.

Apr 20, 2009 | Sharp Office Equipment & Supplies

1 Answer

Developer sign


The developer doesn't need to be reset on AR series machines. Toner and developer are in one cartridge. There is a drum reset. That is service code 24-07.

Did you replace the drum as well?

Aug 11, 2008 | Sharp AR-5316 Advanced Digital Imager...

7 Answers

Sharp copier ar-5316


That unit uses an AR-016TD Toner/Developer Cartridge. The developer is changed each time you replace the toner. To remove the drum unit open the right side cover, then the front cover, remove the TD cartridge, loosen the green screw on the front of the developer unit housing just above the TD slot. carefully remove the DV unit without tipping or you will spill out the existing DV. Then you can pull out the drum unit. There may be a green screw on the drum that must be loosened but I don't think so on that particular model. Installation is the reverse of removal.

Jan 05, 2008 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-5320 Black and White Copier Logo

1,568 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

255 Answers

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...