Does M10 need a battery? - Samson Dynamic Vocal Microphone

• Starter Mounting Bolt, Type 1, M10-1.5 X113mm And M10-1.5 X45mm, Gm 2,2.5,3.4 L
• Thread Size: M10-1.50
• Length (In): 1.770 And 4.450 Inch
• Length (mm): 113mm

The battery is most likely shot, there is a sensor in the battery pack that wont let it charge or come on when the battery is bad. You can order a new battery for it.

As you have access to another machine (as you have posted here!), go to the Toshiba site, and find the drivers for your laptop.

(There are three M10 laptops showing, this is one of them: Driver for Toshiba Satellite Pro M10-S405, or you could choose from: THIS PAGE, where you can choose the exact model).

Download them to a USB stick, or write them to a DVD/CD and keep them safe in case you need them again in the future.

Hope this helps.

No. The M10 works with SD cards, which are limited to 2GB in size.

from: The Taperssection Forum http://taperssection.com/index.php?topic=139638.360
"Hi all,

maybe I can offer an explanation why some people have the RTC problem and others have not. After leaving my M10 on the shelf for about two months without switching it on (batteries were still fully charged!), I had to set the clock.
So I wondered what is going on. I pulled out the schematic of the M10s big brother, the D50.
The power supply section is rather complicated with lots of MOSFET switches and regulators, even one for the RTC battery. Checking the component values, I guesstimate that it takes about 30 to 40 hours to recharge an empty RTC battery - the state of the battery is in when you are asked to set time and date. If fully charged, you can expect 2000-3000 hours of RTC operation.
It seems to me that the D50 (and probably the M10) switch off completely when battery powered - not even the RTC battery is recharged!

So it depends on your use profile whether you have the dreaded "set date and time" problem or not. Regular use (best every day) keeps the RTC battery charged. in the future, I will let it go into sleep mode, and not switch it off. Another solution is to plug in the power supply before storage and let the M10 run for two days to top off the RTC battery, this should be sufficient for two months.

BTW if someone could send me a schematic of the M10, I could replace my educated guess with fact.

Greetings,

Rainer"

You don't need any software.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program such as Picasa.

I woul try to download it from a reliable site and print or see if Denon sells it

dvd drive you can remove from the backsdie opening the cover but display problem is becoause of faulty ram and the battery .remove the battery and try to on and clean the ram and fix it.

If the camera has recently been dropped you may have lens damage that is preventing it from powering up. If it hasn't been dropped your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper). Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera and give them a full charge (assuming that you are using rechargeable batteries). This cleaning clears the problem about 90% of the time. If it doesn't work for you, your batteries may need to be replaced or the camera may have a problem that requires professional repair.

Try cleaning the battery contacts in the camera with a cotton swab lightly dampened with rubbing alcohol.