Question about Televison & Video

It need to demagnetize using a demagnetizer or permanent magnet (PM). move the PM to the center of the tv then rotate it ccw make a round small circle to bigger circle as you move the PM away from the screen. But do not put speaker near the tv. You can also switch off the tv for a night then turn on again this process will demanetize the screen automatically but be sure no speaker put near the tv. If this will not solve the problem. it might be the technician forgot to refix the degausing coil or Thermostat.

Posted on Jun 25, 2009

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

Take a square or a rectangle and push the top to one side . That is a parallelogram. But so are the square and the rectangle.

Mar 27, 2015 | Microwave Ovens

Movies that are created for "Wide Screen" viewing show up in letterbox on your TV. If you go to a theatre you notice it is a big rectangle. To be able to fit all of the widescreen movie on a TV it has to make the height smaller.

Because many people want to see the "*complete*" Movie, the "Letterbox Format" came about. I do NOT know what the word "Letterbox" actually means, or how that term was chosen. To get the complete Rectangle into that Square, they discovered that they could shrink the entire rectangle to fit that square. Meaning, what used to take 2 inches on your screen, now may only take 1.75 inches. Now a problem arrose. When you shrink the WIDTH to fit your dinky Square of a TV, the HEIGHT also has to be shrunk along with it, or else you're stretching the image as if it was on silly-putty ("Compression"). When the image was shrunk to fit the TV Screen, they were left with a gap at the top and bottom of the screen. So they simply fill it in with "Black". I guess the only alternative was to leave it snowy.

Because many people want to see the "

Nov 13, 2014 | Televison & Video

An acre is about the size of football field. This would be 3 laps around the track.

Jul 07, 2014 | Lands Phones

Infinite.

A one meter by 48 meter rectangle has an area of 48 square meters and a perimeter of 98 meters. A one centimeter by 4800 meter rectangle has the same area and a perimeter of 9600.02 meters. A one millimeter by 48,000 meter rectangle has the same area and a perimeter of 96,000.002 meters. A rectangle one micron by 48,000,000 meters has an area of 48 square meters and a perimeter of 96,000,000.000002 meters. Keep making the rectangle skinnier and skinnier without changing the area, and the perimeter keeps getting longer and longer.

A one meter by 48 meter rectangle has an area of 48 square meters and a perimeter of 98 meters. A one centimeter by 4800 meter rectangle has the same area and a perimeter of 9600.02 meters. A one millimeter by 48,000 meter rectangle has the same area and a perimeter of 96,000.002 meters. A rectangle one micron by 48,000,000 meters has an area of 48 square meters and a perimeter of 96,000,000.000002 meters. Keep making the rectangle skinnier and skinnier without changing the area, and the perimeter keeps getting longer and longer.

May 01, 2014 | Computers & Internet

You cannot convert a linear unit into an area unit. If your 60 m are the length of a straight segment, the area enclosed is nill (zero). If the 60 m are the perimeter of some closed line, you need to know the shape of the figure limited by the the closed line (rectangle, circle, square, other polygon).

Post the details of the problem and we will see what can be done to solve it.

Post the details of the problem and we will see what can be done to solve it.

Feb 26, 2011 | Casio FX-300MS Calculator

Well, here are some advices on how to match your sunglass to your face: 1. Suare face: Most complimentary style of sunglasses for a square face: To minimize the width of the face, it is best to choose sunglasses that add length. This can be best achieved by buying sunglasses that are not as wide as the widest part of your face. It is also a good idea to soften the "squareness" of a face by more fluid, rounded style frames, so as to decrease the perception of a broad jaw line. 2.Oval face-Most complimentary style of sunglasses for an oval shaped face: Generally any type of sunglasses suits an oval face, but just make sure that the size of the frame is proportionate to the face. 3.Round face: Most complimentary style of sunglasses for round shaped face: To sharpen a round face, select frames with straight or angular lines that will help make the face look thinner and longer.

4.Diamond face:Most complimentary style of sunglasses for a diamond shape face: Glasses that are oval, shaped or rimless are very complimentary for this type of face.

5. Rectagle face-Most complimentary style of sunglasses for squar shaped face: To compliment this style of face, it is best to choose sunglasses that will shorten the face and widen the face, both at the same time. The best style of frame to choose is one that is round, or deep to help soften the face.

6.Triangle face-Most complimentary style of sunglasses for a Base-Down Triangle face: To compliment this style of face, it is best to emphasis the top part of your face with strong balancing frames. 7.Inverted triangle-Most complimentary style of sunglasses for an inverted triangle face: Choose a type of frame that balances your face and broadens the lower part of your face. Low temples and rimless style of sunglasses are a good style to consider.

4.Diamond face:Most complimentary style of sunglasses for a diamond shape face: Glasses that are oval, shaped or rimless are very complimentary for this type of face.

5. Rectagle face-Most complimentary style of sunglasses for squar shaped face: To compliment this style of face, it is best to choose sunglasses that will shorten the face and widen the face, both at the same time. The best style of frame to choose is one that is round, or deep to help soften the face.

6.Triangle face-Most complimentary style of sunglasses for a Base-Down Triangle face: To compliment this style of face, it is best to emphasis the top part of your face with strong balancing frames. 7.Inverted triangle-Most complimentary style of sunglasses for an inverted triangle face: Choose a type of frame that balances your face and broadens the lower part of your face. Low temples and rimless style of sunglasses are a good style to consider.

Nov 07, 2010 | Clothing Accessories

Some players have trouble with this puzzle by not noticing that the bottom circle is part of the red area

If you diagonally divide the top red section into four equal shapes, these shapes can be placed around the circle to form a square

As you're given half the length of the square, working out the area becomes a simple calculation

The solution and a picture showing the above can be seen here

http://professorlayton2walkthrough.blogspot.com/2008/11/puzzle089.html

If you diagonally divide the top red section into four equal shapes, these shapes can be placed around the circle to form a square

As you're given half the length of the square, working out the area becomes a simple calculation

The solution and a picture showing the above can be seen here

http://professorlayton2walkthrough.blogspot.com/2008/11/puzzle089.html

Jan 12, 2010 | Nintendo Professor Layton & the Curious...

You shape is a rectangle and a right angled triangle. You need to divide it into the rectangle and the right angled triangle and add the areas.

Area of a rectangle is length * width

Then just add the two together.

Area of a rectangle is length * width

Then just add the two together.

Oct 08, 2009 | The Learning Company Achieve! Math &...

Hello,

**I will assume you are familiar with the basic concepts of matrix algebra**.

Turn calculator [ON]

Press [MODE][6:MATRIX]. Select the matrix you want: MatA, MatB, Matc

Let us assume you select 1: MatA.

MatA (mxn) sceen: there you specify the dimensions of the matrix, the number of rows, and the number of columns. Press 5 for a 2x2 matrix.

The matrix entry screen shows, a rectangle is highlighted. Enter there the a_11 coefficient, exemple 1.

1 [ENTER]. Highlight moves to a_12 ;

1 [ENTER] highlight moves to a_21

1 [ENTER] highlight moves to a_22

2 [ENTER] Highlight stays on a_22.

Matrix is defined. The values I used are arbitrary. Enter your own.

Suppose you want to calculate the determinant of MatA

Press [SHIFT][MATRIX][7:det][SHIFT][MATRIX][3:MatA] [)] [=]

Now you want to calculate the square of matA.

Press [SHIFT][MATRIX][3:MatA] [x^2][=]

A 2x2 matrix is displayed. It is MatA[^2].

If you define MatA, MatB, MatC y

Turn calculator [ON]

Press [MODE][6:MATRIX]. Select the matrix you want: MatA, MatB, Matc

Let us assume you select 1: MatA.

MatA (mxn) sceen: there you specify the dimensions of the matrix, the number of rows, and the number of columns. Press 5 for a 2x2 matrix.

The matrix entry screen shows, a rectangle is highlighted. Enter there the a_11 coefficient, exemple 1.

1 [ENTER]. Highlight moves to a_12 ;

1 [ENTER] highlight moves to a_21

1 [ENTER] highlight moves to a_22

2 [ENTER] Highlight stays on a_22.

Matrix is defined. The values I used are arbitrary. Enter your own.

Suppose you want to calculate the determinant of MatA

Press [SHIFT][MATRIX][7:det][SHIFT][MATRIX][3:MatA] [)] [=]

Now you want to calculate the square of matA.

Press [SHIFT][MATRIX][3:MatA] [x^2][=]

A 2x2 matrix is displayed. It is MatA[^2].

If you define MatA, MatB, MatC y

Sep 24, 2009 | Casio FX-115ES Scientific Calculator

It would be "cheating" for anybody to do your "homework" from your computer-mathematics class, unless you submit your answer, saying that an EXPERT on FIXYA did all the work on your behalf.

Apr 14, 2009 | Microsoft Windows XP Professional With...

Sep 25, 2017 | LG Televison & Video

Sep 25, 2017 | Televison & Video

113 people viewed this question

Usually answered in minutes!

Did I mention that this is a Sharp Aquos LC-52D92U (LCD)?

The area is a perfect square with a defined line.

I have heard of magnets working on CRT's and have also heard of degaussing on CRT's but not on LCD's.

I was thinking this may be some sort of convergence issue but maybe I am wrong.

×