No audio in 3 nspeakers

Hi. Ir's a 3.5mm to 3.5mm male to male jack lead. They can be had on Amazon or ebay etc.

AKORD 3 3 5 mm to 3 5 mm Gold Plated Stereo Jack to Jack Lead Cable

You can switch audio playback between the docking station and your Surface speakers. Here's how:
Step 1: Swipe in from the right edge of the screen, and tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.) Step 2: In the search box, enter manage audio, and in the search results tap or click Manage audio devices. Step 3: Next, do one of the following:

• To play audio through the audio port on the docking station, tap or click Speakers (CNXT Audio).
• To play audio through the Surface speakers:
  • On Surface Pro 2 or Surface Pro 3, tap or click Speakers (Realtek High Definition Audio).
  • On Surface Pro, tap or click Speakers (2-High Definition Audio Device).

Step 4: Tap or click Set Default, and then tap or click OK.
http://globalvision.com.vn/vn/may-in-ma-vach-pc-3.htm

click start control panel sounds and audio volume advanced speakers select appropriate speakers or audio you will find 3 drop down lists make the necessary setting adjustments
hope this helps

@ Radioshack PN 271-0002 Volume Control with Push Switch, it will fix the speakers but make them MONO, so you need 2 of them to make it stereo. I recommend 2 cause this speakers have the volume distribution problem from factory.

Clearly, it's blown.

I found these on eBay...

Monitor Audio woofers(3) for Bronze new 5 1/2" Nice! http://cgi.ebay.com/Monitor-Audio-woofers-3-Bronze-new-5-1-2-Nice-/270658700667?pt=Speakers_Subwoofers&hash=item3f0484057b




MONITOR AUDIO R300 BASS MIDRANGE DRIVER SPEAKER SUPERB
http://cgi.ebay.com/MONITOR-AUDIO-R300-BASS-MIDRANGE-DRIVER-SPEAKER-SUPERB-/290517371017?pt=UK_AudioVideoElectronics_HomeAudioHiFi_HiFiSpeakers&hash=item43a42f4889

control panel sounds and audio,volume,advanced,speakers select appropriate speakers or audio you will find 3 drop down lists make sure you have selected the right speakers or control panel,administrive tools,computer management,device manager,sound,could be a yellow question mark? right click to re-install drivers
hope this helps

check is there is any Electronic interference, keep the speakers away from the woofer

control panel sounds and audio,volume,advanced,speakers select appropriate speakers or audio you will find 3 drop down lists make the necessary adjustments there or control panel,administrive tools,computer management,device manager,sound,could be a yellow question mark? right click to re-install drivers
hope this helps

If your Golf is the premium sound model here is the list:
2001 Volkswagen Golf Car Radio Wiring Schematic for Monsoon Audio
Car Radio Battery Constant 12v+ Wire: Plug #3, Pin #7
Car Radio Accessory Switched 12v+ Wire: Plug #3, Pin #4
Car Radio Ground Wire: Plug #3, Pin #8
Car Radio Illumination Wire: Plug #3, Pin #6
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Plug #2, Pin #5
Left Front Speaker Negative Wire (-): Plug #2, Pin #6
Right Front Speaker Positive Wire (+): Plug #2, Pin #3
Right Front Speaker Negative Wire (-): Plug #2, Pin #4
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Plug #2, Pin #7
Left Rear Speaker Negative Wire (-): Plug #2, Pin #8
Right Rear Speaker Positive Wire (+): Plug #2, Pin #1
Right Rear Speaker Negative Wire (-): Plug #2, Pin #2
Signal for Anti-Theft Alarm System Wire: Plug #3, Pin #1
Data Link Connector (DLC) K-Wire: Plug #3, Pin #3
Battery Supply Constant 12v+ Wire for Anti-Theft System (SAFE): Plug #3, Pin #5
CD Changer Data In Wire: Plug #1, Pin #13
CD Changer Data Out Wire: Plug #1, Pin #14
CD Changer Clock Wire: Plug #1, Pin #15
CD Changer Constant Battery 12v+ Wire: Plug #1, Pin #16
CD Changer Control Signal Wire: Plug #1, Pin #17
CD Changer Ground Wire: Plug #1, Pin #18
CD Changer Left Line Out Wire: Plug #1, Pin #19
CD Changer Right Line Out Wire: Plug #1, Pin #20