Question about Blodgett DFG-100 Gas Single Oven

4 Answers

Error code f 03 has come up on our oven - Blodgett DFG-100 Gas Single Oven

Posted by on

  • Anonymous Mar 16, 2008

    error code F3 has come up on our oven too. The elements heat up really hot and won't turn off?



4 Answers

Error cood photocopy sharp
e7 - 11

Posted on Mar 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,665 Answers
  • Kleanthis Mavropoulos
    Kleanthis Mavropoulos Feb 15, 2008

    below is a comment posted by robigrave.

    "The F3 error is a really dumb mechanical errror of whether the 250 volts is on the elements. It does not involve the computer or the thermostat,or the relay " electronics" at all - it is just simply 3 contacts that supply 250 Volts, and whether or not the contacts work, the elements work,or the fuses work. This the same 250 Volts that is on an ordinary dial stove, and the dumbest part of the whole unit."

    "good luck ! Damned the manufacturers for not putting this information in the user manual."



It might be your temperature sensor, in my error codes f3 is usually temp sensor

Posted on Feb 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

I know what you mean. I was cooking with this appliance tonight and suddenly it displayed an f-3 code. My advantium oven is less than 8 months old. Not sure how this happened or how to fix the problem. In order to sleep tonight (the constant beeping) I had to shut power off at the breaker pannel. Is this representative of the the type of quality that GE stands for???? I am sooo frustrated. I cook with my advantium oven all the time and love the dual abilities of this appliance. Like I said this is brand new and to have the f-3 code which apparently (from what I read) is a failed key pad. I am very dissapointed and am begining to think about pulling my stock from this company!

Posted on Dec 26, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Oven Whirlpool AKZ 223/IX/1 error code - F 03

Looks like a problem with oven temperature sensor. Some of these models have a thermal fuse which may need to be checked and reset if possible or replaced.

The sensor is not cheap. see site


Aug 06, 2014 | Whirlpool Ovens

1 Answer

Bosch hbn560550b 03

This is a temperature sensor failure code. You will have to contact service or get a replacement sensor and repair yourself if capable

Nov 01, 2013 | Ovens

1 Answer

Hi my whirpool oven is stating F 03 what do i have to do? Thanks

Usually the F-03 error code means you have a bad oven tempreture sensor. To test the tempreture sensor you would use a multimeter set to ohms. At room tempreture the sensor should read between 1000-1100 ohms any less then this and you would replace the oven tempreture sensor in the unit. If you have any further questions message me back. Please also remember when our chat has fully concluded to rank how this opinion has helped in your appliance situation it allows me to continue helping others in similar situations in the future. Thanks
p.s I also looked afterwards in your service manual and the F-03 error code does refer to the oven tempreture sensor

Sep 13, 2011 | Whirlpool RBS275PD Electric Single Oven

1 Answer


F-03 code indicates a failure with the temperature sensor. The sensor comes into the oven cavity on the back wall and is a little smaller than a pencil.

The most common reason for this error is a wire connection between the sensor and the control board. Try to measure the sensor with ohm meter, an read about 1080 ohms at room temperature if it is good.

Hope this helps.

Jul 20, 2011 | Whirlpool AKZ159IX Oven

1 Answer

My 16 month old whirlpool inegrated oven has a fault code F03 on screen. How can i fix this myself?


The F 03 code indicates a failure with the temperature sensor.

The sensor comes into the oven cavity on the back wall and is a little smaller than a pencil. The most common reason for this error is a wire connection between the sensor and the control board.

You can measure the sensor if you have access to a good ohm meter. It should read about 1080 ohms at room temperature if it is good.

Aug 01, 2010 | Ovens

1 Answer

Error code F2 E3 r:02 E:03

Kitchen Aid Error Code F2-E3

Called kitchen aid, they said you need a new control board part #9782455.

Mar 16, 2010 | KitchenAid KEBC107 Electric Single Oven

1 Answer

The bottom oven isnt working its a prima oven and has the fault F 03 on it , cant find the manual so not sure what code means

F-03 code is a defective temperature sensor.
It is inside the oven on the back wall up high. A thin piece of metal about 3 inches long.
It should unscrew and be removed from inside the oven. A volt meter set for ohms should read 1100 +/- 50 ohms. If more or less ohms replace the sensor.

Dec 20, 2009 | Ovens

1 Answer

F 03 fault on whirlpool double oven AKZ161

(F-03). This code represents a failed oven temperature sensor(RTD). Its open. You will have to replace this sensor to restore optimal performance.

please rate and god bless.

Mar 25, 2009 | Ovens

1 Answer

F2 and F3 error messages on Tappan wall oven model 12-4980 10/03

These are the F2/F3 error codes for a Tappan oven
F2 Oven too hot Check Bake function, if OK, replace oven temperature sensor F3 Oven temperature sensor open Check oven temperature sensor, should be ~1100 ohms at room temperature. If too high or low, replace oven temperature sensor
please take the time to give this solution a fix ya rating.


Feb 09, 2009 | Tappan Ovens

2 Answers

Error code F1

I had the same problem and found this post:

The oven had been cleaned earlier in the day and the touch pad ribbon connector was shorting. I cleaned it with rubbing alchohol and blow dried the whole board for good measure. Hooked everything back up and haven't had a problem since.

Jun 08, 2008 | Jenn-Air JJW8230D Electric Double Oven

Not finding what you are looking for?
Blodgett DFG-100 Gas Single Oven Logo

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blodgett Ovens Experts

Dennis Boxerman

Level 3 Expert

1236 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

butch welch

Level 2 Expert

147 Answers

Are you a Blodgett Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides