Question about Linksys SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)

2 Answers

My voip settings for TPG internet are not working. what am i missing? the settings given to me by tpg are - sip server - aphone6.tpg.com.au port - 5060 domain - tpg.com.au codec - g729 username and password - my tpg username and password phone number- my username the settings i used are - (in line 1.... after disabling line 2) sip port - 5060 proxy - aphone6.tpg.com.au display name - my username user ID - my tpg username password - my tpg password preferred codec - G729a where do i enter domain and phone number? cant find it. The device works.The internet works. Voip does not.

Posted by on

  • drallya May 11, 2010

    As I know TPG does not guarantee that third party VoIP modem will work with their service. I was also trying to help my friend to setup her VoIP but couldn't resolve it. Until she finally decided to buy a VoIP Router from TPG. As I remember these are the settings needed to configure on the VoIP Router: SIP Server/Proxy: aphone6.tpg.com.au Port # 5060 Audio Codec: G729 Username/Phone number: TPG UN Password: TPG PW Domain name: tpg.com.au

  • Anonymous Mar 28, 2014

    I cannot access my email, horwood8@tpg.com.au. When I try to access it asks if "forgot your password". I have't forgot my password. It just won't let me in. Please, if you can, help me to access my email.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 58 Answers

How To Contact TPG Broadband 1800383368 Support Phone Number Australia?
Comparable supplementary Broadband services some kind of errors are very general in TPG Broadband which occurred occasionally. Among all the Services TPG is one of the most renowned Broadband Service Contributor. There is Hundred number of Broadband service crossways the world and a vast numeral of the consumer using the Broadband service. Consumers have no difficulty with this Broadband service. But Few kinds of basic Difficulty occurred in TPG which are given below-
•Service
•VPN
•Broadband Service
•VPDN
•IBC and Dial-Up
•Webhosting
•DNS Service

If any other version related matter occurred in TPG then just Call TPG Broadband Support Number. If the consumer has any trouble in TPG Broadband our licensed told you how you can solve your Difficulties.
For More Difficulties Call on
TPG Broadband Support Number Australia
1-800-383-368
https://tpgsupportnumberaustralia.blogspot.com/


my voip settings for TPG internet are not working. - tpg broadband-wptq154mqyxr2q2drheh3htj-3-0.jpg

Posted on Jun 08, 2018

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Http://www.allnet-italia.it/img/speciali/pdf/777702433.pdf

Posted on Sep 14, 2009

  • xiuqing ye
    xiuqing ye Oct 14, 2013

    yes,It's hard to lodgi

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is my right if my phone & internet provider has disconnected the ADSL copper line and forced me to change to nbn, but can't set it up after 2 attempts within 25 days? I'm caring for my elderly...


How can I get the compensation despite signing for Customer Service Guarantee Waiver

You can't, you gave up that right by signing it.

Phone the companies and when you get nowhere, keep asking to go higher, you will go to a supervisor and then a manager. The manager will get things done.

Nov 05, 2017 | Cell Phones

1 Answer

Want to change my domain name from tpg to Telstra ?


Please, consider the following websites:


https://www.tpg.com.au/terms_conditions/hosting_ipaddress.php

Cancelling the Service with TPG.


    8.1 The service must be cancelled by notice in writing or it will continue to renew automatically and the Customer will continue to be charged for such renewals. Where the Customer delegates the service to another provider, it is still the Customer's responsibility to advise TPG of this and cancel their TPG service.

    8.2 It is the Customer's responsibility to ensure that TPG has received their written cancellation notice at least 30 days before the service expires.

    8.3 The written cancellation notice must specify which service is to be terminated and must contain the Customer's personal account details, including: The account username or Customer ID number, the account password and the Customer's name, address and telephone number.

    8.4 If the Customer cancels their service during their first subscription year, none of the subscription fee will be refunded. If the Customer cancels during a subsequent subscription year, they will be entitled to a pro rata refund equal to the remainder of their subscription year less the 30 day notice period.

    Register your domain with Telstra, transfer an existing one across, or buy a domain with a plan.

    https://www.telstra.com.au/small-business/websites-and-ecommerce/domain-names


Oct 11, 2017 | Computers & Internet

1 Answer

Check my account have gone to your gone to tpg.com.au/account no satisfaction


we have none of that information here at fixya.sorry

Feb 25, 2015 | Cell Phones

1 Answer

I have polycom SoindPoint 301 and i would like to use as SIP to one of the VoIP providers. I dont have asterisk in my network and i would like to connect it directly to the VoIP provider. So there is no...


1st. Get the IP address of the phone. and type that into browser.
*- default user: Polycom / password: 456

*- Under menu SIP, type in your voip provider
*-Under menu LINES type in user info and "secret" should be your password.

Make sure your ports are open (SIP is usually 5060) you can change it in that same config screen.

Mar 28, 2011 | Polycom SOUNDPOINT IP 301 SIP

1 Answer

I have a SAGEM D30V cordless phone which was working beautifully when I was connected to Telsta (here in Australia) but I changed my service provider over to TPG and now the phone only rings once and then...


I had the same problem when I switched to a ST780WL router. I solved it by changing the voice country configuration to uk as the ring cadence for australia in this device is wrong.

Feb 17, 2011 | Cell Phones

1 Answer

Hi I am in Australia in case you need to know. I have a ps3 connected to a tpg ADSL 2+ connection via dynalink RTA 1025W modem router. Can't get connected to COD modern warfare 2 online... Hangs at...


Hey mate might be a bit late but over the last month or so i had the same problem.. iv got the exact same set up as you and finally found that by disabling the UPnP in the router home page thing and setting ur playstation a static ip and then put it in the dmz area in the router it should solve the problem .. took me forever to find this out hope it helps..
if you do get on im rusty_diesel add any time for a game (ps3)

Aug 28, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

How to do internet settings manually on nokia e71


BEFORE YOU BEGIN, please note the following:
On the Nokia E71 some of VoIP settings are hidden by default, and you will need Nokia's new VoIP SIP application.
This application can be used to configure VoIP settings on your Nokia. You can create new VoIP profiles and modify the existing ones, and create and modify VoIP parameters and NAT/Firewall traversal settings and that are normally not visible on the device UI, such as codec settings and SIP domain-specific NAT/FW settings. It is also possible to save all the VoIP profile settings to a text file. It also enables VoIP over WCDMA which means you can make VoIP call over 3G Internet connection.
Using your PC you can download free Nokia SIP VoIP application from here or you can check Nokia web sitefor latest version.
Extract and install SIS file using Nokia PC Suite software on your PC.
Once installation is complete you will be able to see "SIP VoIP Settings" application under Applications menu on your Nokia, which you will need in STEP 5 of this configuration guide for better voice quallity or enabling VoIP over 3G Internet connection.
Here you can find Nokia E71 SIP settings for voip setup and SIP client configuration guide with VoIPVoIP service.
STEP 1 Go to Tools / Settings / Connection / SIP settings. Create the following profile
Profile Name: VoIPVoIP Service
Profile: IETF Default
Access point: (your WLAN AP name)
Public user name: 5551231234@sip3.voipvoip.com ( Instead of 5551231234 account number example, use the account number assigned to you when signed up for VoIPVoIP service. When recorded your phone will show sip:5551231234@sip3.voipvoip.com )
Use Compression: No
Registration: "Always on "
Use Security: No

STEP 2 You do not need to enter Proxy Server settings
Proxy Server Address: none
Registrar Server:none
Realm: none
User Name: none

STEP 3 Enter the following for Registrar Server settings
Registrar Server: sip3.voipvoip.com (When recorded your phone will show sip:sip3.voipvoip.com)
Realm: voipvoip.com
User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for VoIPVoIP service. )
Password: Enter the password that you chose when you signed up for the service.
Transport Type: UDP
Port: 5060

STEP 4 Go to Tools / Settings / Connection / Internet Tel. Settings
Create a new profile for "voipvoip"(555123xxxx), name it "voipvoip"
Choose "voipvoip" as Preferred profile
STEP 5 For better voice quality or in order to be able to make VoIP calls over 3G internet connection you need to use Nokia SIP VoIP Application you installed.
Go to Applications on your phone and click on "SIP VoIP Settings" application. Choose VoIP services/VoIPVoIP (or the name of your VoIPVoIP account Internet profile.)
Click on "Profile Settings" and find "Allow VoIP over WCDMA" option and change it to "ON" This change allows VoIP over 3G connection on Nokia phones.
For better voice quality go to Codecs and delete all codecs except G729. There should be only G729 codec left under codecs setting
STEP 6 Reboot your phone. Once your phone is back on it will automatically register to VoIPVoIP.
Once it is registered you can start making calls.
Default call type: To switch between normal GSM calls or VOIP calls, navigate to Tools / Settings / Call / Default call type. Select Cellular to make normal calls to the phone number or Internet to use VoIP to call the number or address
Make Calls!
To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:
1 + Area Code + Phone number
To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:
Country Code + City Code + Phone number
For example if you want to call Brazil (country code 55) phone number in Rio de Janeiro (city code 21) you must dial 5521 and phone number. + sign can also be used and number can be dialed as +5521xxxxxxx


BUT RATHER THAN FOLLOWING THESE PLS CALL TO YOUR CUSTOMER CARE THEY WIL GIVE THE SETTINGS. SAVE THEM. THEN FOLLOW THE INSTRUCTIONS. THIS DOES NOT COST ANY COST. PLEASE TRY THIS

Jul 07, 2010 | Nokia E71 Smartphone

1 Answer

I have Nokia E72, how can I connect to VOIP service in our office?


go to Tools > Settings > Connection > SIP settings
Profile name: any
Service Profile: IETF
Default Access point: select your access point
Public user name: sip:your-voip-ext@voip-server.com
Use compression: No
Registration: select your preference
Use security: No
Proxy server: empty/no settings
Registrar server:
> Registrar server address: sip:voip-server.com
> Realm: asterisk
> Username: voip-ext-no.
> Password: voip-password
> Transport type: Auto
> Port: 5060

Then go back to Connection > Internet Tel.
create profile and select the SIP settings you just created.


May 06, 2010 | Nokia E72 Smartphone

1 Answer

Can't access voice tab on WRP400


If your wireless VoIP router was provided by your VoIP provider they will usually lock this option on the router since they have pre-configured the voice settings(sip server, phone number, password, codecs) before they deliver the device to your location. if you have a working internet connection already you can give your VoIP proiver a call so that they can remotely check the voice settings on their end to verify if it's working or not.

Nov 24, 2008 | Linksys Wireless-G WRP200 Router

Not finding what you are looking for?
Linksys SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA) Logo

Related Topics:

1,946 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...