Question about Nokia 6233 Cellular Phone

5 Answers

6233 won't power off and won't power on

Hi, 6233 was not powering off using the power button. power button feels very loose. could only power off by removing battery. now will not power on as power button is too loose. i want to know how to open up the phone. phone has had same problem in the past and was repaired by service provider.

Posted by on

  • 1 more comment 
  • gargs Dec 08, 2007

    The 6233 regularly has this problem and This is the second phone from Nokia where I am facing this problem.

    The tech are not ready to open the phone as shouldering may cause different problem

  • pli Ikh Nov 05, 2008

    i have the same problem

  • mrnay Apr 19, 2009

    loose power button, i turned it off by taking the battery out and now cant power on again..Is it possible to power on without the use of the button?...



5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 316 Answers

Sounds like the power button has broken
this sort of repair needs to be done by a tech as the button has to be resoldered to the board

Posted on Nov 06, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 45 Answers

due to drysolder of ON\OFF switch in the pcb or damge in the push button in the panel( D cover)will be problem .by resoldering ON\OFF switch or by replacing the D cover you can solve the problem respectively.

Posted on Nov 07, 2007


Bla bla bla

Posted on Sep 10, 2008

How to power on the 6233 phone without pressing the power on button

Posted on Aug 17, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Nokia 6233 doesn't start fully. it gets on restarting again and again.

Posted on Dec 21, 2007

  • mayur14 Dec 21, 2007

    nokia 6233 doesn't start fully. it gets on restarting again and again.


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 105 Answers

SOURCE: 6233 won't power on and i need help how to switch it on without the power button

you change the power button

Posted on Jun 03, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My laptop was plugged in and lit up showing it was charging but when I pressed power button nothing happened. I unplugged from charger and no lights at all and pressed button and nothing happened. Is

plug where Check for loose power where power cord connects.
A computer repair shop can replace the power on/off button and he power plug input jack if required. Make sure the laptop power charger has the correct voltage for the computer if it is universal power supply/charger.

Feb 08, 2013 | Toshiba Satelite 4000CDS Laptop AC Power...

1 Answer

My Hp 6735s laptop won't turn on, I removed the battery and tried to turn it on using the ac cord only, but still the same problem. I can feel electrical charge on the laptop body. kidher

try to test using voltmeter your power cord charger of laptop maybe loose wiring or damage power supply.if same problem need hp service center that's damage motherboard.

May 23, 2011 | Computers & Internet

1 Answer

Blender has power but won"t turn on

Hello and Welcome to FixYa!
Well the mal-function can be due to numerous reasons. You need to choke out each possibility one by one.
Loose Connections ( Check for all the connections to the circuitry and motor). Bad Starter Button ( Check for the button switching using a Multi meter). Bad Motor Winding (Motor bushes or winding can be the bottle neck).
Check for the quoted possibilities and you'll soon find one good reason for the mal-function.. Feel free to ask anything regarding the trouble.


Feb 25, 2011 | Waring 7011S / 7011G Commercial Work Top...

1 Answer

I need to fix the power button on a nokia 6233 as it is not powering on

Don't fix carelessly or you'll broke your device. If you still in warranty time, go claim them to fix your phone. Or if already expired, go to closest Nokia Service Center to fix it.

If you feel this helpful, RATE please !

Jan 21, 2011 | Nokia Cell Phones

1 Answer

I have using with nokia ovi software update my mobile nokia 6233 but now my mobile is not switch on

Reset your phone by pressing star(*) ,call button , three button and power button simultaneously . Now your phone is ready to use.

Dec 03, 2010 | Nokia 6233 Cellular Phone

1 Answer

Just bought a used model singer 6233 need to know where foot pedal plugs in

The Singer 6233 was one of the models that briefly were made using air-powered foot controls. So you aren't looking for a traditional electrical connection. Instead, your pedal cord's female end will connect onto a black male nipple, that sticks out on the right side of the machine (the side with the handwheel). Just push it on until it feels snug.

May 10, 2010 | Sewing Machines

1 Answer

I need to switch on my nokia 6233 without using the button!

Dear, new buttons is not very expensive, so if you want another solution then open your mobile phone and solder your old button because the problem is that your old button is unsoldered.
ok Thaks

May 08, 2010 | Nokia 6233 Cellular Phone

2 Answers

ON\OFF buton is not responding. The phone is

The power (On/Off) button is not responding probably because it is broken, the phone is dead, or the battery is dead or drained. Connect the phone to a charger and check whether the phone charges the battery or not. The power button is indeed not responding and broken when the phone charges the battery. The only way to turn on the phone is by replacing the power switch.

When the phone doesn't charge the battery, the phone may be dead or the battery is dead/drained. To revive the battery and verify whether the phone is dead or not, check it here.

Apr 06, 2010 | Nokia 6233 Cellular Phone

1 Answer

Regarding formating of the nokia 6233

the send button is the calling button and it workes with in a minute but ur battery must charged to run ur phone for atleast 10 minutes and this procedure will work only with series 60 phones and not with Nokia 6233

May 02, 2008 | Nokia 6233 Cellular Phone

Not finding what you are looking for?
Nokia 6233 Cellular Phone Logo

Related Topics:

2,625 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides