Question about Zanussi 24 in. IZZI ALU Built-In Dishwasher
The START button keeps blinking and the machine won't work. It's a new apartment and the water pressure is lower than in the previous location. Could this be the reason? Is there a way to reset the controls?
A flashing start button shows that the filter is dirty. Remove the filter assembly from the machine. The "tube" can be split into 2 sections fairly simply - do so, and wash each piece under the tap to clean it.
Once the assembly is cleaned properly, select the program that you desire, and press and HOLD the start button for 2 seconds. The wash cycle should begin.
Posted on Dec 04, 2007
Yes hit these buttons in this order high temp heated dry hight temp heated dry this will reset the controls
Posted on Nov 06, 2007
Tips for a great answer:
Dec 01, 2009 | Kenmore 24 in. 17482 / 17484 / 17489...
Aug 09, 2009 | GE Dishwashers
May 07, 2009 | Dishwashers
Apr 01, 2009 | Whirlpool 24 in. DU1055XTP Built-in...
Jan 21, 2009 | Kenmore 24 in. 16293 Built-in Dishwasher
Jul 31, 2008 | Whirlpool 24 in. ADP6940 Dishwasher
Feb 07, 2008 | Frigidaire 24 in. GLD2150RCC Built-in...
Feb 19, 2007 | Kenmore 24 in. 17032 Built-in Dishwasher
605 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: