Question about D-Link AirPlus G DWL-G710 Wireless Range Extender

5 Answers

Set up the DWL-G710

Hi, i am trying to configure my device however when i set the ip address on the web browser it wont take me to admin nor set up wizard. Ive checked everything, including switching my lap top from wireless to land while the device is connected. i reset the back of the device but nothing happened, what can i do?

Posted by on

5 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: set up the DWL-G710

Try to reset the device then in the ie put the ip

Posted on Oct 03, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Expert
  • 53 Answers
Re: set up the DWL-G710

Make sure you are using the right range of IP addresses, for instance, if your device has a default address of, then your computer must have a manually input address of something like, otherwise the devices will not communicate. You can change the address on your computer be going into your network connections folder, right clicking on your LAN folder, selecting properties, then right click on TCP/IP protocal on the protocal list, and also select properties. Here, you must uncheck the "Automatically Obtain IP Address" option and input the address shown above. The next two boxes will be and for Default Gateway enter your devices IP address. Don't worry about the DNS address for now. Press ok to save the settings. You may have to restart your computer when you are finished. I hope this information helps you. Good luck!

Posted on Nov 06, 2007

Re: set up the DWL-G710

Restart your computer. i noticed when i connected this into my router it wouldnt find the site. restarting should work.

Posted on Jul 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: set up the DWL-G710

To go to the device admin site, try using instead of the other ip adresses.
good luck

Posted on Mar 13, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 132 Answers
Re: set up the DWL-G710

Too, make sure you have no WWW before your ip it should look like this:

Posted on Nov 06, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Trouble logging into a D-Link DWL-G710 Wireless

Let me try to get the info straight:

Your computers IP address (manually configured):
D-Link Range Extender IP:

If this is correct, you will need to change your IP to something like:

192.168.0.X (make sure it's not in use on your network already)

otherwise you will not be able to connect to it with your comptuer.

Apr 03, 2010 | D-Link AirPlus G Wireless Range Extender...

4 Answers

Wireless repeater

Hi there

Getting Started

Setting up a Wireless Infrastructure Network
Pleaseremember that D-Link AirPlus G wireless devices are pre-configured toconnect together, right out of the box, with their default settings.Fora typical wireless setup at home (as shown above), please do thefollowing:
1) You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
2) Consult with your Cable or DSL provider for proper installation of the modem
3) Connect the Cable or DSL modem to the DI-524 Wireless Broadband Router
(see the printed Quick Installation Guide included with your router.)
4)If you are connecting a desktop computer to your network, install theD-Link AirPlus G DWL-G510 wireless PCI adapter into an available PCIslot on your desktop computer. You may also install the DWL-G520, orthe DWL-520. (See the printed Quick Installation Guide included withthe network adapter.)
5) Install the D-Link DWL-G630 wireless Cardbus adapter into a laptop computer.
(See the printed Quick Installation Guide included with the DWL-G630.)
6)Install the D-Link DFE-530TX+ adapter into a desktop computer. The fourEthernet LAN ports of the DI-524 are Auto MDI/MDIX and will work withboth Straight-Through and Cross-Over cable. (See the printed QuickInstallation Guide included with the DFE-530TX+.)

Using the Configuration Menu

Whenever you want to configure your network or the
DI-524, you can access the Configuration Menu by
opening the web-browser and typing in the IP Address
of the DI-524. The DI-524 default IP Address is shown
-Open the web browser
-Type in the IP Address of
the Router (
Note: if you have changed the default IP Address assigned
to the DI-524, make sure to enter the correct IP Address.

-Type admin in the User
Name field
-Leave the Password blank
-Click OK

TheHome>Wizard screen will appear. Please refer to the QuickInstallation Guide for more information regarding the Setup Wizard.

Home > Wizard

Thesebuttons appear on most of the configuration screens in this section.Please click on the appropriate button at the bottom of each screenafter you have made a configuration change.

Home > Wireless

SSID-Service Set Identifier (SSID) is the name designated for a specificwireless local area network (WLAN). The SSID’s factory default settingis default. The SSID can be easily changed to connect to an existingwireless network or to establish a new wireless network.

Channel-6 is the default channel. All devices on the network must share thesame channel. (Note: The wireless adapters will automatically scan andmatch the wireless setting.)

WEP- Wired Equivalent Privacy (WEP)is a wireless security protocol for Wireless Local Area Networks(WLAN). WEP provides security by encrypting the data that is sent overthe WLAN. Select Enabled or Disabled. Disabled is the default setting.(Note: If you enable encryption on the DI-524 make sure to also enableencryption on all the wireless clients or wireless connection will notbe established.)

WEP Encryption- Select the level of encryption desired: 64-bit, or 128-bit

Key Type- Select HEX or ASCII

Keys 1-4- Input up to 4 WEP keys; select the one you wish to use.

Home > WAN > Dynamic IP Address

Jul 18, 2008 | D-Link AirPlus G Wireless Range Extender...

2 Answers

Range Extender DWL-G710 & Wireless N Router DIR-615

Try to configure your new router and you have to reconfigure the Range extender to tally with the new router. The IP Address that the range extender should have should depend on the DHCP server of your router that provides the IP Address.

Jan 12, 2010 | D-Link AirPlus G DWL-G710 Wireless Range...

1 Answer

I have an Airplus Wireless Range Expander how do I find the IP?

just press and hold the reset button till the lights on the front blink to go back to the factory defults.
factory IP address is

type that in your browser address bar after you reset the G710

Nov 05, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

1 Answer

How to Change DWL-G710 IP address

in your case, you only need to change the range expander's IP address from to

to do this, you need to connect a computer's LAN cable directly to the range expander's LAN port. when both devices are powered ON, then access the initial IP address

when you are in the web interface, click the LAN button and enter the suggested ip under the IP text box: see figure below.

when you already set the IP, click on APPLY. then you are good to go. You can then connect the router, then connect the range expander to one of the router's port, then computers.

Oct 22, 2009 | D-Link AirPlus G Wireless Range Extender...

1 Answer

Ip conflict after setting up dwl-g710, after setting up the extender i cannot access it because my pc reports an ip conflict, any suggestions would be appreaciated


You will get an IP conflict if you have assigned the same IP address on your network devices. Every networking devices should have different network address or IP address. If for example the IP address of your router is, then your wireless expander can be configured as,, and so on but not since it is already being used by the router.

Jun 30, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

3 Answers

Setup range extender

Access pointe bağlanmak için öncelikle bilgisayara elle ip adresi vermek zorundasınız daha sonra cihazı ethernet yoluyla bağlayarak ayarlayabilirsiniz.Ancak modeme bağlarsanız ip adresini ayarlamak gerekmez.Kolay gelsin.Good By

Jul 18, 2008 | D-Link AirPlus G Wireless Range Extender...

1 Answer


check the dial-up configuration settings. via the admin web page for that DWL-710 gateway

Jun 27, 2008 | D-Link AirPlus G Wireless Range Extender...

1 Answer

DWL-G710 and DWL-700AP compatibily problem

when using the AP you have to make sure you set the SSID, channel & wireless key in the AP the exact same as the router and make sure when configuring the Ap that you set the default gateway as the IP address of the router.

Nov 03, 2007 | D-Link AirPlus G DWL-G710 Wireless Range...

Not finding what you are looking for?
D-Link AirPlus G DWL-G710 Wireless Range Extender Logo

1,737 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Repeaters & Transceivers Experts


Level 1 Expert

7 Answers

Brad Brown

Level 3 Expert

13369 Answers


Level 2 Expert

106 Answers

Are you a D-Link Repeater and Transceiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides