Question about Protech PTV-707 Television

2 Answers

Our TV got password accidentally by my kids I

Our Protech TV got password accidentally by my kids through the remote control, till now I could not open it bcoz i dont the password. is there a way to resolve it without having it reprogram by the technician from the repair shop

Posted by on

  • glomeie Jun 25, 2009

    I tried it already couple of times but still not working only blue screen appears with a padlock displayed. if i want to reset it what will i do

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 353 Answers

Unplug tv
then try to turn power on while unplugged and let sit for a little while
maybe that will help it reset

Posted on Jun 25, 2009

  • gerald darling
    gerald darling Jun 25, 2009

    try code 0000 or 1234

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

LOCK IN 1 CHANNEL AND THEY HAVE A LOCK CODE

Posted on Sep 09, 2009

  • trapilaramil Sep 09, 2009

    LOCK IN 1 CHANNEL AND I CAN'T CHANGE THE CHANNEL CAUSE THEY HAVE A LOCK CODE

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Restore Sony KDL32L5000 to factory defaults


• Check the input selection by pressing the INPUT button. You may be watching the wrong input.
• If you cannot hear sound from the TV, you may have accidentally pressed the MUTING button on your
remote control; press the MUTING button again or press VOL + to deactivate muting.
• If the remote control is not functioning properly, the batteries may be installed incorrectly or may be low or
an object or light may be interfering with the remote control.
• To reset the TV to factory default settings:
1 Turn on the TV.
2 Press and hold down the V button on the remote, press the POWER button on the TV set. (The TV
will turn itself off, then back on again.)
3 Release the V button when the TV is turn on.
WARNING: The factory reset will clear all of your customized settings including the Parental Lock setting.
When the Password is lost or cannot remember, enter the master password: 4357. This password clears your
previous password and allows you to enter a new password.

Jul 08, 2012 | Sony KDL32L5000 32 in. LCD HDTV

1 Answer

Need codes for my ProTech television i'm using a Chunghop Universal Remote


Hello
There is only one setup code for Protec TV wit Chunchop remote control. It is [0738].
OK.

Sep 03, 2011 | Universal Remote Control Remote Control

1 Answer

Our remote control will not work with our Dometic Model 57915 unit. It used to when you changed the temperature up or down you got a beep from the unit. When you push the on/off button, it used to beep...


The comfort control center requires 12 VDC . If a fuse blew that feeds 12 VDC to control box at ceiling for some reason in your panel when unplugged accidentally, that would cause the remote/wall and control box at ceiling not to communicate.

Jun 05, 2011 | Dometic Rooftop RV Air Conditioner

1 Answer

Remote control code protech


avelinabiten

I have provided a link with instructions on how to perform a power scan to locate a code for your TV. Just click on the link and follow the directions. I hope this helps.

http://www.dishnetwork.com/SupportSection/power-scan-instructions
Ray Calo
DISH Network

Jun 28, 2009 | DISH Network IR Remote Control

2 Answers

How to erase parental control code


I finally found out how to reset the V-chip password on this princess DT1350-P Tv. All you have to do is turn the TV on and turn to a channel that doesn't prompt the V-chip password (even if it's snowy) and hold down the volume (down -) button on the main unit while holding down the number "0" on the remote control. It might take a few tries, and you might need to change the TV channel for some reason but if done correctly, either the TV will turn off, or the menu screen will pop up and ask if you want to set the vchip password, either way you should be able to watch your TV now! :)

Nov 12, 2007 | Disney DT1350-P 13" TV

3 Answers

VChip password forgoten


http://www.youtube.com/watch?v=0Zc8Jbq3qE4
Here's your  answer - Hold the down volume control on the TV. Then press the remote # 0. This will bring up the reset password menu. Then reset the password. We need a kid to solve are problems. FWL 

Oct 19, 2007 | Toshiba MW20FP1 20 in. TV/VCR/DVD Combo

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Protech Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5100 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Protech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...