Question about Hotpoint Microwave Ovens

1 Answer

Model# rvm1435bj01 microwaves display pf & f3

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 9,047 Answers

F3 on a GE / Hotpoint microwave means you have a shorted membrane keypad.

So until it is repaired, please leave it unplugged or leave the door open when it's not in use, and please do not leave it running unattended.

On this model, the membrane keypad is not available as a separate part, so you would have to order the control panel frame assembly, which comes with a new keypad.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Then you disconnect the keypad strip as shown in the attached photo.

Next, move your circuit board into the new frame.
That is a simple do-it-yourself job.

You can find helpful exploded view diagrams and order parts by entering your full model number here.

The control panel frame assembly with keypad is part number WB07X10874 and you can get it for $75.98 here. (Compare that to $120.75 from GE!)

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

model# rvm1435bj01 microwaves display pf & - a226ba2.jpg

Posted on Jun 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOTPOINT COUNTERSAVER PLUS RVM 1435 DISPLAY READS F3


"F3" on a GE / Hotpoint microwave means you have a shorted membrane keypad.

On RVM1435-series microwaves, the membrane keypad is not available as a separate part, so you would have to order the control panel frame assembly which comes with a new keypad.


In this case, you simply move your circuit board into the new frame. That is a simple do-it-yourself job.
You can find helpful exploded view diagrams and order parts by entering your full model number (RVM1435XX###) from the tag on the oven here.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Then you unplug the keypad (as per the photo below) and move the circuit board into your frame.


34374fd.jpg

Some connectors on the relays have a lock:
positivelock.jpg
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Nov 23, 2011 | Hotpoint RVM1435 Microwave Oven

1 Answer

My GE microwave is beeping and the display says F3


F3 on a GE / Hotpoint microwave means you have a shorted membrane keypad.

We would need your model number to give you more specific info, part ordering info, and en estimate if needed.

Simply contact me here with your model number and symptoms for free help.

On some models, the membrane keypad is peeled off and a new one stuck on.

In other models, the plastic frame must be replaced, and it comes with a keypad already installed.

May 12, 2011 | General Electric Microwave Oven

1 Answer

My microwave oven stop working. buttons will not work and an error code F3 come up on display. Could you tell me what this could be?


F3 is a shorted key you need a new keypad control panel. For the JE2160 series countertop model this should be the part#WB27X10681

Dec 06, 2010 | GE JE2160 Microwave Oven

1 Answer

Microwave display flashing & beeping.


You have a failed membrane keypad.

On this model, GE doesn't make any parts available except the tray and the roller.

If it's in warranty, they will exchange or repair it.

It it's out of warranty, you're out of luck.

I'd advise you to contact GE Customer Service in case they may be able to help you.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jul 25, 2010 | GE JES1036PWF 1100 Watts Microwave Oven

1 Answer

Key pad lockout and load beeps


F3 on a GE / Hotpoint microwave means you have a shorted membrane keypad.

Since it's a basic counter top microwave, this may not be worth repair when you consider the cost of a new comparable unit.

If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved.

The part number of your keypad is
WB27X10624 and you can get it here for $51.37 plus shipping.

Good luck!

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 27, 2009 | GE Countertop Microwave Oven

2 Answers

Microwave bleeps and display shows F3


F3 on a GE / Hotpoint microwave means you have a shorted membrane keypad.

If and when an oven is coming on or doing anything by itself, this is very dangerous and can result in a fire.

So until it is repaired, please leave it unplugged or leave the door open when it's not in use, and please do not leave it running unattended.

If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved.

You can find helpful exploded view diagrams and order parts by entering your full model number here.

There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

dee77f7.jpg

If you would like to have us do this repair for you, we do that for $39.95 plus part costs.

But please note that for some GE models, the membrane keypad is not available as a separate part, so you would have to order the control panel frame which comes with a new keypad.

In this case, you simply move your circuit board into the new frame.

Feel free to contact us with your full model number and we can tell you if yours is one of these models, and if so, we'll also give you the part number you need to order and a link to the best priced supplier.


At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

May 20, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

GE microwave f3 code


You have a shorted touch pad.. here is a link for a replacement.. http://www.pcappliancerepair.com/model-display.php

If you open up everything and examine the touch pad, you may see something that is causing the short and fix it, oherwise, you'll have to remove and replace it.. Hope this helps..

Sep 12, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Jim Thurston

Level 3 Expert

670 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Hotpoint Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...