Question about Televison & Video

2 Answers

COLOUR S ARE TAINTED

THERE IS A YELLOW HUE ON ALL THE WHITE SCENES AND THE GRENS ARE DARK BLUE EXCEPT AROUND THE EDGES OF THE SCREEN ..I TRIED TO ADJUST BUT IT IS NOT HELPING.

Posted by on

  • 1 more comment 
  • Anonymous Nov 14, 2007

    the picture is not good it looks like in the edges has two diferent colors or double picture

  • BOLLO Nov 29, 2007

    the model no.is 50 V 715 HITACHI ULTRA VISION REAR PROJECTION TV .

    BOLLO

  • BSully Apr 17, 2008

    I have the same problem on my Mitsubishi WT-46809 ...a yellow hue on the entire screen except on the left and right of the screen where the black strips are when watching non-HD programming. Did both regular and advanced convergence...No help. Any suggestions ? Whats are IC's and do they need to be replaced ? If so how ?

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 179 Answers

What is the model number

Posted on Nov 28, 2007

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 143 Answers

You might have bad solder connections on the convergence board if you solder and does not fix the problem then you have bad ics replace them k

Posted on Nov 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the perfect amount of red,blue,and yellow hue for the screen


that's got t o do with personnel preference and room lighting , but as a general rule adjust color hue's till the edges of a white color object on screen has just lost its primary color edge

the older projection TV's actually have voltage numbers for the service tech to adjust them too , but im not remembering seeing any in the LCD manuals

Mar 29, 2016 | Element Electronics FLX3210 32 in. LCD TV

2 Answers

Colour prints coming out with a lilac hue


check whether the printer is in proper mode or not

Feb 29, 2008 | Epson Stylus Photo 950 InkJet Printer

1 Answer

Picture is pink in places and dark scenes the picture is mostly green


Oh dear.

It sounds like you have magnetised the screen by placing something magnetic too close.

Your only hope is to unplug the TV, and remove ANYTHING magnetic away from it, such as speakers etc. Give it a few hours then retry.
If this has been going on some time, it will already be too late.

The other possibility is the tube could be going!

Jan 10, 2018 | Panasonic TX-36PF10 TV

1 Answer

Yellow hue in center edges are ok


These tvs have had optical block problems. How old is the TV? This may be under warranty.

Apr 16, 2009 | Hitachi 50V710 50" Rear Projection...

1 Answer

Color


Most likely a bad CRT,not worth fixing......T.

Oct 10, 2007 | Sony KV-36FS16 36" TV

1 Answer

Yellowing screen off-center - not a convergence issue


You might want to try the optic lens adjustment screw on the side of each crt. Mark them before moving.

May 30, 2007 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Faded colors


If the picture is dark or messed up too bad, the magic focus will not function, are all the primary colors faded? RED GREEN BLUE? You might have a bad CRT, would call a service man to check out.

May 21, 2007 | Samsung HCN5527W 55" Rear Projection...

2 Answers

Try # 2... Green Fog


The green gun in your picture tube is set a little too high. If you are experienced in removing the back cover of TV's,etc., you may try to find the drive and/or bias controls either on the circuit board that plugs on to the neck of the picture tube or mounted on the main circuit board of your TV. These controls are usually labeled. If you can find them, locate the green bias or drive control and back it down a little while watching the picture through a mirror. A slight adjustment may correct your problem.tJIS IS CALLED GRAY SCALE ADJUSTMENT. BE CAREFUL THERE ARE SOME HIGH VOLTAGE CIRCUITS NEARBY. WORK WITH ONE HAND AND USE AN INSULATED TOOL TO MAKE ADJUSTMENTS I hope this may help you.AGAIN BE CAREFUL!! Stargazer

Feb 26, 2007 | Toshiba 32HFX71 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5339 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...