Question about Computers & Internet

1 Answer

I changed my admin password and since then, Dlink dir655 does not take any passwrods. I Reset the router but it does not recover. My network with DIR655 is down. What should I do? It is second bad experience I had with dlink. First one was USB 7 port Hub

Posted by on

  • chrisbock May 11, 2010

    what do you mean it does not recover



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 106 Answers

When Dlink resets it goes back to the default password and login which is something like: Admin in the user part leaving the password blank.

So, goto the default the ip address should be set to

and just enter Admin in the user name. It is case sensative, capitalize the A.

If this does not work, make sure you are holding the reset button down long enough for it to reset. Unplug the router for 20 seconds and plug it back in.

Posted on Jun 24, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How to get the password of d-link router after reset?

You connect from your computer by putting the network IP Address into Internet Explorer. After you reset, you set your own password. Try putting into the browser URL line and press enter.

  • How do I reset my router? ' D-Link > ... > FAQs > Routers > Wireless Routers > DKT Series How do I reset my router? There are various ways of resetting your router. If you cannot access the web user interface, ... D-Link Benelux, PO Box 48, ...
  • How to factory reset your D-Link router - YouTube
    • 1 MIN
    2013-05-21 · Video embedded · How to factory reset your D-Link router ... Set up Router (D-link) Wi-Fi password Part 2 ... How to Reset Your Router in Plain English ...
  • How to recover/change your lost D-Link wireless password ...
    • 2 MIN
    2013-05-21 · Video embedded · How to recover/change your lost D-Link wireless password ... How to change D-Link router's wifi password ... How to Reset a Router ...

  • Jun 05, 2016 | D-Link Computers & Internet

    1 Answer

    Where can i find the set up wizard of my router

    Just enter the default IP in a web browser. It should be
    User: Admin Password: [none / blank] Unless it has been configured. To clear setting, just hold the reset in the back till it cycles.

    This is demo: A non-functioning emulator to see the routers interface. Check it out.

    Oct 16, 2012 | D-Link Dlink Xtreme N Gigabit Router...

    1 Answer

    How to recover dir-600 dlink router password withoute reset

    You need to log into the dlink router and look at the Wireless Security and you will see the password. To get into the router you will need the ip address of the router, the default user id and the password. You manual will give you this info if you do not know it.

    Get online and got to In the google search box type: "Dlink Support" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operating system when requested. Look for Manuals.

    The IP address to put in your browser to get into the router is:

    The default userid is: admin

    There is not default password, so leave it blank.

    Jun 05, 2012 | D-Link DIR-600 Router

    1 Answer

    How to recover network password for dlink wbr2310?

    If the default password on the D-Link has been changed then -
    To reset the D-Link back to the default settings -
    Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button. (firmware version was 3.00, and upgraded to3.05)Connect a LAN cable from the D-Link to your laptop/computer'sLAN port, open the browser on your laptop/computer and enter the D-Link's configurationURL..
    The default login = admin
    The default PW = blank (just press Enter)You can now change the default adminpassword.
    You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-

    May 24, 2012 | D-Link Computers & Internet

    1 Answer

    How to change password of dlink router 600 without reset

    the default dlink password is password or 1234
    if that doesn't work then the password has been changed and you will need to reset the router to factory defaults. hold the reset button for 30 seconds while powered on.

    Mar 04, 2012 | D-Link DIR-600 Router

    1 Answer

    How to recover password for Dlink DES-3350SR

    In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.
    If you need more help post back! Thumbs and testimonial are welcome!

    Aug 04, 2011 | D-Link (DES-3350SR) (851210) Networking...

    1 Answer

    Lost dlink dir 655 password

    Default user is Admin and default password is blank. (Don't type anything)

    If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is When logging in, the username is admin and leave the password box empty.


    May 29, 2011 | D-Link Xtreme N DIR-655 Wireless Router

    1 Answer

    Dlink DIR 615, network name changed, won't accept password

    It appears your brother has changed your wireless router settings.
    You can reset the Dlink back to the default settings by -
    Power off the Dlink and press and hold the RESET button on the back of the Dlink and the power on the Dlink. Hold the RESET button for 5 secs. until the LEDs flash at the same time.
    Connect a LAN cable from the computer to the Dlink. Open a browser and enter the Dlink's configuration URL
    Default login = admin
    PW = blank (just press Enter)
    You can now change the admin password and set up a new passphrase (ie encryption)
    For details on how to secure your wireless from unauthorized access, please click on this link and follow my instructions :-

    May 19, 2010 | D-Link DIR-615 Wireless Router

    3 Answers

    I forgot the username of dlink wbr-1310 wireless router

    Hi there,

    As an initial info try to do a hard reset on the unit, this process will restore the system into a original settings. you can find the reset switch on either on the left of right sight of your router.


    you may visit this SITE to recover again your current password without erasing or removing the current settings made.

    Reset Password.

    Hope this idea helps you.

    Thank you for using fixya.

    Nov 20, 2008 | D-Link 802.11g Wireless Router WBR-1310...

    3 Answers


    The routers I have had will default to the factory password if you press and hold the reset button in for a while. On the linksys brand it defaults to ADMIN. Lookin the manual for your router and looker for RESET and you may find something similar to this in the instructions. If you don't have them you can find them on line.
    Let me know if you need more help.

    Dec 17, 2007 | Computers & Internet

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    334 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18424 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    David Payne
    David Payne

    Level 3 Expert

    14162 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides