Tv was on working fine switched it off then 4 hours later tried to turn it on and nothing happened why is this
I went to turn on my TV Friday night and it would not turn on. There usually is a red light that is on when the TV is off and that light turns green when the TV is on. That light is not red, green, or anything. It simply isn't on. The TV will not respond with either the remote or just using the buttons on the front of the TV. I've tried unplugging it and plugging it back in, changing outlets, and leaving it unplugged for 12 hours or more and it still will not work. What is wrong? Help me, please!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That's because somehow the lightening caused a fault in the power board. Ypu can try an unplug for 2 hrs and then reconnect and start again If that dosn't work you will require intevention to replace the power supply
6/1/2010 11:34:21 AM Good morning I have sound problem it started with the cable hook up there box to the television, now sound is very low. Turn up the TV control to max, nothing but low sound. Of course cable people have no idea of a problem, I disconnected the cable but the same problem, love the set work for two years, note: thing happen when all analog change to digital. help!
I had the same problem and took it apart. Before the repair there was no "click" when I pushed the button, a clue to the problem. The on-off button on the front pushes a weakly made angle piece of plastic inside which had broken. The plastic piece in turn is supposed to push an internal switch which is offset to one side.
I used epoxy (Araldite) to repair the broken plastic angle piece, but it still looks weak to me so I switch the tv off at the wall and leave the on-off button alone (though it does work now).
Opening the case requires some knowledge and care, and can be dangerous. It may void the warranty so be careful or give it to a qualified repair person.
This is due to switches malfuction due to corrosion in switch and dust accumulated in the switch. Since you rarely used switch now after failure of remote of remote control you tried to operate the switch. Another thing you said did"t get picture, maybe memory problem is there. This can be sorted out by the technician only.
Is this a Toshiba or an RCA? The problem description does not seem to be right. From what your saying though it sounds like there isn't any high voltage. If you are not qualified to work on TVs you probably should take it to a shop for repair.