Question about Panasonic KXTG5632BP Twin Cordless Phone

1 Answer

No link to base

When I call from my codeless handset I get this message

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

This may help. It's from the Panasonic help page:

You may try to:

Disconnect AC power adapter from the back/bottom of base unit, then connect it again properly.
No link to base - spacer.gif OR, to resolve this issue, you have to re-register the handset.

  • To do this on a non-expandable cordless phone:
    Press and hold the LOCATOR/INTERCOM button on the Base until a beep sounds.
    Press and hold the FLASH/CALL WAIT button on the Handset until a beep is heard.
    When registration is complete, a beep sounds from the handset.
    Wait for 20 seconds after registration is complete to allow the handset to establish communications with the base.
    If this fails to help:
    Remove the AC Adapter from the phone base or wall outlet for a few seconds and reconnect. It may also be necessary to remove the battery from the handset for a brief moment.

  • To do this on a expandable cordless phone system:
    Press and hold the LOCATOR/INTERCOM button for the extension that is displaying "No Link To Base" on the Base until a beep sounds.
    Press and hold the FLASH/CALL WAIT button on the Handset that is displaying "No Link To Base" until a beep is heard.
    When registration is complete, a beep sounds from the handset.
    Wait for 20 seconds after registration is complete to allow the handset to establish communications with the base.
    If this fails to help:
    Remove the AC Adapter from the base or wall outlet for a few seconds and reconnect. It may also be necessary to remove the battery from the handset for a brief moment.

Posted on Jun 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Unable to change handset registrations from old base to new.


Hello Linda,

See if my FixYa Answer from this previous post helps to Deregister and Register your old handsets to your new base.:

My phone says no link to base but am right beside it

Regards,

-Ellsworth

Mar 25, 2017 | Panasonic KX TG4031 Cordless Phone

1 Answer

The telephone batteries are fully charged; however when I attempt to use the telephone I receive a message stating, "No link to base. Move closer to base, try again." The telephone is very close...


Check your user's manual for registration, or RE-REGISTER the handset to the base. In essence, it involves stepping to the registration on the handset, pushing the handset locator button on the base, then saying OK on the handset. They will sync up.

Carl

Feb 10, 2011 | Panasonic Lands Phones

2 Answers

Phone displays a message saying no link to base when it is closer to the base?


Hi,

Following may be the cause for getting no link to the base.

1. The handset has lost communication with the base unit.Move closer to the base unit, and try again.

2. Confirm that the base unit’s AC adaptor is plugged in.

3. Raise the base unit antenna.

4The handset’s registration may have been cancelled .Re-register the handset.

To Register, follow the below steps.

Headset: Press MENU and then press ‘0’ ‘0’

Base unit: Press and hold HANDSET LOCATOR until the CHARGE indicator flashes.

(After the CHARGE indicator starts flashing, the rest of the procedure
must be completed within 1 minute.)

Handset: Press OK, and then wait until the handset beeps.

Your handset is registered to Base unit.

Thank You

Aug 18, 2010 | Panasonic KX-TG2620 Cordless Phone

3 Answers

Hello sir i have codeless phone of panasonic kx-tga110ex


Hi, I have a Panasonic cordless phone and cannot activate my Identicall. It has been set up by Telkom, but I need to do the settings on my phone.
Can you help me please?

Thanks
Tess

Jul 01, 2010 | Panasonic KX-TG1033S Cordless Phone

2 Answers

Have just bought a second hand BT mango telephone with 2 extra handsets.There doesn't appear to be anywhere to connect the phone wire to handsets 2 and 3. Only a socket for the power supply. Is this right?


There isnt a socket to connect the additional handsets because it is not needed. The handsets all use a single line by connecting to the base unit. You need to make sure the additional handsets are registered to the base unit.

For how to do this and anything else look in the manual which can be downloaded for free at http://phone.manualsonline.com/manuals/mfg/british_communications_bt/bt_mango_1_2.html

Aug 14, 2009 | Uniden Cordless Phone

1 Answer

TOO FAR FROM BASE


Hi! This may cure your problem!
Re-registering the handset
If “No link to base. Move closer
to base, try again.
” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
LMake sure the base unit is not being
used.
LHave the handset and base unit near
each other when re-registering the
handset.
LKX-TG5422 and KX-TG5423 only:
Confirm the extension number of the
handset which has lost its link to the
base by placing the handset on the base
unit or charger.
If you accidentally assign another
handset’s extension number to it, the
other extension will stop functioning.
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing
{V} or {^}, then press {>}.
4 KX-TG5421 base unit:
Press and hold {HANDSET
LOCATOR
} until the CHARGE
indicator flashes.
KX-TG5422 base unit:
Press and hold the handset locator
button that corresponds to the handset
you want to re-register ({HANDSET
LOCATOR
1} or {HANDSET
LOCATOR
2}) until the CHARGE
indicator flashes.

Below is a link that will take you to the instruction manual for your phone.

http://www.phone-manuals.com/panasonic/KX-TG5422M.shtml

Hope this helps! Hal

Feb 27, 2009 | Panasonic KX-TG5422M Cordless Phone

1 Answer

Not registered


hello there i think this is because you need to register the second handset with the base here are the instructions

REGISTRATION
Registration links the base to a cordless handset. Once a handset is
registered it can use the base’s phone connection. A cordless handset will
not operate until it is registered to the base. During the registration
process, keep the handset near the base.
1. Press the flash/program button on the base until LINK HANDSET shows
in the display. 2NO is the default setting.
2. Press the 1 number key or press the MESSAGES/CID (or) button
on the base to scroll to 1YES.
3. Press flash/program to confirm handset is linked to the base. WAITING
HANDSET REGISTRATION shows in the display.
4. Press the flash/program button on the handset until LINK BASE? shows
in the display. 2NO is the default setting.
5. Press 1 on the handset keypad or cid/vol (or) button on the
handset to scroll to 1YES.confirmation tone when the handset is successfully linked to the base.
6. Press flash/program on the handset again to confirm. You will hear a long

please leave rating if you find this usefull hope this helps thanx for using fixya!!

Jan 26, 2009 | GE 27958GE1 Cordless Phone

2 Answers

No link to base.


unplug the base and when you plug it back in
the handset should work

Dec 13, 2008 | Panasonic KX-TG2356 Cordless Phone

1 Answer

No link to base


Good Day,

See this link, this is pg 105 of the manual on how to re-register the handset to the base.

http://www.fixya.com/support/p123254-panasonic_kx_tg2740_cordless_phone/manual-7363/page-105

Hope this helps

Jul 07, 2008 | Panasonic KX-TG2740 Cordless Phone

2 Answers

No link to base move closer to base


Your getting this message because the radio portion of the handset or/and base is not communicating with each other. This can be temporary or fatal. You can try re-registering the handset(s) to the base by following the directions in the manual, its fairly easy to do for any model. If that does not work,and you have more than one handset not working with this problem, then it sounds as if your base needs repair or replacing.

Feb 04, 2008 | Panasonic KX-TG5632M Twin Cordless Phone

Not finding what you are looking for?
Panasonic KXTG5632BP Twin Cordless Phone Logo

612 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

john milligan

Level 3 Expert

512 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...