Question about Bose Acoustimass 10 III System

2 Answers

Bose audio input receiver cable 15 pin

I bought a Bose acoustimass 10 serie III system but I haven't the cable for the audio input!!
The cable that I need is a female D SUB (D-type connector) with 15 pin (8pins above and 7pins under) from de acoustimass to the receiver!
Can someone tell me were I can buy these cable?

Thanks in advance

Lydricgalland@yahoo.com

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 10 Answers

You can buy it on ebay but it's cheaper just to make one. If you can solder, all you need is a female 15-pin d-type connector and a bunch of speaker wire. Here is a diagram of the connections.

Bose audio input receiver cable 15 pin - eef34d9.jpg

3_15_2013_4_16_30_am.jpg

Posted on Mar 22, 2010

  • burnair Feb 05, 2011

    Where can you find this 15 pin D- sub as most are smaller.
    Please E-mail me at burnair@aol.com
    Thanks

  • jc montero Mar 15, 2013

    hi can you please email me that diagram you posted on the connections to kronix64@hotmail.com thanks

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Assemble the dsub 15pin Soldered it..when i connect to my amplifier has some error it says " overload".

Posted on Mar 31, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i find a bose 15 pin input cable for the acoustimass model?


Try eBay. Lots of Bose cables. Search engines provide faster answers than tossing something like this out to us for a possible answer.

Sep 27, 2011 | Bose Acoustimass 10 III System

1 Answer

Need new system input cable for acoustimass 10


I've made a diagram of my serial cable. You can easily make one with some speaker wire and a 15-pin d-type female serial connector. Solder the wires as shown in the diagram.

6ac4306.jpg

Jan 26, 2010 | Bose Acoustimass 10 III System

1 Answer

Bose Acoustimass 15 subwoofer is completely dead.


Clarify, did it ever work for you? Were both receivers used properly configured for the subwoofer? Did you also test the other speaker moduels running off the subwooferto see if they work?

Speaker Receiver setting
• Left and right LARGE
• Center LARGE
• Left and right surround LARGE
• Center surround* LARGE
• LFE/Subwoofer ON
With an Acoustimass 16 Series II system or upgraded Acoustimass 15 Series IlI system only.

Apr 23, 2009 | Yamaha RX-V663 Receiver

1 Answer

How to make a 15 pin female sound in cable


Ya, here is a diagram I made of my Acoustimass 10 IV input cable. All you need is a female 15-pin d-type connector and a bunch of speaker cable (also one RCA connector for sub connection). Here's my diagram:

628d111.jpg

Mar 10, 2009 | Bose Acoustimass 10 III System

1 Answer

My sound in cable was missplase and can i make it my self and pls any body can send me the cable structre. pls...........


Here's a diagram of the 15-pin serial input cable that came with my Acoustimass 10 IV system. You just need a 15-pin female d-type connector, one RCA connector and a lot of speaker wire. Here's my diagram:

ef142c2.jpg

Mar 10, 2009 | Bose Acoustimass 10 III System

1 Answer

Do I have to have a powered bass module to make the cubes work?


Your Acoustimass 5 is a powered sub with powered surround speakers. If you are not getting sound output, the internal fuse may be open and you will have to replace it. Bose used a heavy multiple output cable terminated in a miniature DIN plug to connect speakers. You may be able to find one on eBay.

Apr 17, 2017 | Bose Acoustimass 6 III System

3 Answers

Acoustimass 9


Acoustimass 10 IV cable

0ccc7c6.jpg

Feb 29, 2008 | Bose Acoustimass 15 System

1 Answer

Bose Acoustimass 8 pin Cable


Bose Lifestyle 3 or 5 not sure which. DIN 8 pin to 2 RCA's

Sep 11, 2007 | Bose Acoustimass 10 III System

Not finding what you are looking for?
Bose Acoustimass 10 III System Logo

13,232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74473 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...