Question about Dryers

1 Answer

Model # PYE4500AYV Serial # 11168132AV. The dryer just quit

Model # PYE4500AYV Serial # 11168132AV. The unit just quit working. It has no power and the light inside will not even come on. The out was checked and was good. The cord was checked with an OHM meter and found to be good. What's my next step?

Posted by on

  • ljthomas Jun 24, 2009

    I didn't see any internal fuses. I took the switch off the door and checked with an OHM meter and everything checked OK. I am having a hard time checking the timer. It has so many wires, I don't know if I am checking it right. IF THE TIMER IS BAD, WILL EVERYTHING INCLUDING THE LIGHT NOT WORK? I checked the heating element and it also checked OK.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

Are getting power to section switch, any internal fuses. also check the safety switch on the door.

Posted on Jun 24, 2009

  • paul sandouk
    paul sandouk Jun 25, 2009

    i forgot one thing and that is the start button. make sure that there is power there. when you push the safety switch in you should hear a faint click in the upper counsel if you do then the power is getting there, you can also check motor and see if got power there. some where the power is being broken.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i make it quit beeping so often

Hello friend, thanks for your post!

I understand that your Frigidaire dryer is beeping and flashing lights. To reset your dryer you should disconnect power, by unplugging it or flipping the household circuit breaker, for roughly ten minutes. Which lights are blinking on your display panel? It could be providing you an error code.

If the reset does not help correct the issue, could you please provide me with your model number? Typically you can locate the serial tag (which lists your model number) on the door frame of your dryer. If you need further assistance please reconnect with me. -Matt

Sep 27, 2014 | Frigidaire Dryers

1 Answer

Hi there my name is Larry from Mich ,I have a estate electric dryer model Tesco640po serial ms0808710 ,I had a power surge and the dryer quit working it does turn on but only stays on if I hold the start...

The key is "Power Surge" you have no idea what got burnt. I've never heard of the brand is it expensive. Might need to get a replacement.

May 20, 2014 | Dryers

1 Answer

Dryer runs but wont heat

There are 2 possibilities for this problem.
1. The limit switch is out. The limit switch is located on the heating element on the back of the dryer. This is a small button type part. it will have 2 prongs on it for 2 wires that slide on for power.
2. The heating element is out. This will be on the back of the dryer and depending the model it should be a long metal piece that has metal elements inside of it to heat the dryer. or it could be a large round unit. these can be tested with an om meter.

The limit switch will be the cheapest to start with on replacing.
If you need further assistance please do not hesitate to ask. I will need the make, model, and the serial number of the unit to help you further. the model and serial number can be found by opening the dryer door and looking by the hings. there should be a sticker with this information on it.

Apr 13, 2010 | Kenmore 64852 Electric Dryer

1 Answer

Substitute heating element

Go to the local appliance repair parts store- they will have generic replacement elements and will likely be able to get you a right one for your dryer.
You should know if possible two things: model/serial number for your unit and length of the heating coil. (perhaps you've already taken it out)

Dec 14, 2009 | Dryers

1 Answer

GE GAS DRYER will not heat,

yes order a igniter from call me with model and i can ship it very cheap!

Jun 24, 2009 | General Electric DCVH640GJ Gas Dryer

1 Answer

Model le5795xpno dryer quit working had all electial parts checked when pluged in it trip the breaker do you have a wiring picture you can send me and serial number is m70436598 its a whirlpool

Well if it quit the fuse is blown. The fuse mounts on the blower housinf and judges the temperature in the exaust. Check your venting pipe for obstructions and replace the fuse:
My page on Dryer fuse locations
and ID is HERE

If you need further help, reach me via phone at

Jun 09, 2009 | Dryers

1 Answer

Frigidaire Dryer (electric) wont start

it could be the door switch or the control timer .

Oct 19, 2017 | Frigidaire AEQ6000ES Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts


Level 3 Expert

80339 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brad Brown

Level 3 Expert

17322 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides