I have a Sanyo PLC XF46N Projector and woudl like to Change out the lens to a LNS W03 lens do I need to Add the lens attachment 02?

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

1,Turn the projector on,press the Menu botton

2,Press the Left ,Right,Up or Down to find the "Option" .

3,select "ceiling"

4,select "Yes"



Have a good day!

We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,

motherboard, powersupply ... with high quality and competitive price.

Jerry Lampdeng Limited

1,Check the fans ,whether the fan is running,when you turn on the projector
2,if the fans run, then ,check the lamp or lamp ballast
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

the Lcd panel was broken,
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

1,Turn the projector on,
2,Press and hold the "Power" button for 30 seconds.
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

USD140,the Original lamp
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

the throw is adjusted by the zoom on the lens, getting a different lens (or projector suited for this situation), or moving the projector.

Check lamp, Ballast and the Air filters

check ur fan and fan rpm sensor

The Fix Ya rep suggested that I try the "Reset" button located next to the Audio out on the side of the projector; this solution proved to be the fix I needed. I was able to get the lamps to warm up and get into the menu to cut back the bulbs/power consumption on start-up, allowing the projector to function for a problem-free 4 hour period Unfortunately, I had the same issue this morning, but the same fix worked again.