The width of my refrigerator is 27. Inches. What is the cubic feet

We need to convert everything to a common unit, so let's convert the 18 inches into 1.5 feet.
Volume is length times width times height.
v= 132 x 2 x 1.5
v= 396 cubic feet
To convert to cubic yards, imagine a yard cube. It is 3 feet by 3 feet by 3 feet for a total of 27 cubic feet.
v1 = 396 cubic feet/27 cubic feet per yard
v1 = 14 2/3 cubic yards

So 15 cubic yards should do it.

Good luck.

Paul

Refrigerators and freezers vary in size. Nobody can tell you what size yours is..

Cubic feet just means the width x height x depth.

If your refrigerator is 3ft x 3ft x 3ft That just means 3x3x3 =27. It would be 27 cubic feet
You'll have to measure your own refrigerator/freezer to get your own answer

Hi Bob:
1 cubic yard is 3ft by 3 ft by 3 ft.
3 times 3 times 3 equals 27, so
1 cubic yard equals 27 cubic feet.
2 1/2 inches divided by 12 inches equals .2083333 feet
196 square feet times .208333 feet equals 40.83333 cubic feet
40.83333 cubic ft divided by 27 cubic ft equals 1.5123456 cu yards.
Ta Da!!!!

That may be ok for the US, but in Europe you would need cubic metres.
I yd = 0.914 m, 1 cubic yd = 0.914 x .914 x .1914 = 0.764
So 14.66 cu. yds is 14.66 x 0.764 = 11.2 cubic metres - with a bit of luck!

Cubic feet or inches is length times width times height. once you have the number of cubic inches then divide by twelve this will give you the cubic feet.

Normally refrigerators have stickers inside that state the cubic feet. If that's missing you must measure the width X depth X height to get cubic feet. WxDxH= cubic feet.

Do you want to find the cubic inches or feet..take lenth times width times height that will give you cubic inches if measuring in inches or cubic feet if measured in feet. If want square yards device that number by 27 " there are 27 square feet in a square yard " from they you must find out how many square feet are in a bushel etc. Hope this helps good luck...

Calculating the cubic feet of a space requires multiplying the area of the bottom times the average height. You get the bottom area by multiplying the length times the width. Remember, to get cubic feet, you need all your measurements in feet to start with.

Here is your formula:

VOLUME (in cubic feet) = Length (in feet) X Width (in feet) X Height (in feet)

If it's a rectangular room you're working with, it is all straightforward. If there are irregular walls, it may be necessary to divide up the room into rectangular sections and then add together their individual volumes. If the ceiling is sloped, you need to use the height that has the same ceiling area above it as below it. Good luck! Truly.

Easiest solution is to measure the inside dimensions in inches, tall, width and depth. Then multiply the three dimensions t x w x d = cubic inches. To get cubic feet then divide the above answer by 1728 and the result is cubic feet..

For instance if the fridge is 60 inches tall x 24 inches wide x 18 inches deep; the answer is 60 x 24 x 18 = 25,929 cubic inches... 25,920 divided by 1728 = 15 cubic feet.

I can't locate your particular model online, but you can figure the cubic feet yourself

Empty your refrigerator /or freezer to facilitate easier measuring. Measure the height, width and depth of the refrigerator's interior.

Measure in inches, and write them down.

Multiply the measurements this way: H (height) x W (width) x D (depth).

This is the interior capacity of your refrigerator in inches. To convert the number to feet, divide the number by 1,728. This converts cubic inches to cubic feet.

I hope this helps you. Thank you for using FixYa. Your rating of this answer is appreciated.