Question about FAIP Garden

Open Question

Replacement parts for model 1650 power washer

Spray gun with high-pressure hose

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
CRTN
  • 716 Answers

SOURCE: High pressure hose connection blew up. Fix? or buy new?

Yes take it to napa auto parts and they can cut and attach a new end which are for hydraulics. They are crimped on and meant to hold very very high pressure. I used to use a pressure washer everyday for a living and it was a tractor rental/repair shop and we used the hydraulic fitting machine on the power washer hose all the time so rest assured.

Posted on Mar 11, 2009

Ad
  • 15 Answers

SOURCE: builds up to much pressure in hose and stalls engine

Sounds like the unloader is not working. try replacing it and see if that helps.

Posted on Apr 23, 2009

  • 74 Answers

SOURCE: Cant change the high pressure hose on a Karcher

On the Kärcher, you have a bayonet mount at the base of the tip end of the pistol grip. This is where you attach different types of nozzles and gadgets after having removed the existing sprayer tube. Just push in and turn a quarter of a turn, then you pull it off the pistol grip. The hose is possible to remove from the machine as well, an ordinary threaded mount but since you need the pistol grip to regulate on/off this is probably not what you want to do. If the telescopic wand is made by Kärcher it should be very easy to snap it into place just like when you removed the sprayer tube/nozzle. If the attachment was made to fit Alto washers there is an inexpensive adapter that works very well. Good luck!

Posted on Jun 03, 2009

  • 1 Answer

SOURCE: Simoniz pressure washer cycles whe not spraying?

This condition is normal.

Posted on Jul 02, 2009

  • 497 Answers

SOURCE: durabuilt pressure washer 1600psi. Water leaking

Sounds like a faulty seal around the gun. Repair might be few bucks if you take it in. But the price of the part is probably under a buck. Depends if you want to rip apart it yourself.

Posted on Aug 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Campbell Hausfeld HD4200 spray gun. Will not spray plain water. no siphon effect at feeder tube. What to check?


Check for air leaks above the top of the feeder tube. If it leaks air there, then no suction. Bad gaskets often cause this.

Oct 28, 2016 | Campbell Hausfeld Air Tools & Compressors

1 Answer

How Do You Choose an Air Compressor for Home use?


you go by how loud it is

2 HP is a std home use direct drive motor 240 volt
with regulator
.. pump tyres . air hose .blow of benches low pressure spray paint gun a rattle gun

step up to twin cylinder belt driven compressors
trade preferred
for high daily use of air tools and spray painting..
8cmf to 10 cmf and more
can high pressure gravity feed spray gun

26321322-k4yf1ulnrrhd1qfad32c0iqa-1-0.jpg

26321322-k4yf1ulnrrhd1qfad32c0iqa-1-1.jpg

Oct 21, 2016 | Air Tools & Compressors

1 Answer

Water leaking from spray gun


It depends on were the water is leaking from on the gun. If the water is leaking from were the high pressure hose goes into the gun it could be that on oring as been damaged. If the water is coming from the trigger you may need a new trigger gun.

If you tell me your model number (1.xxx-xxx.0) i can tell you the part number that you will need to give to your Karcher dealer/supplier to replace it.

Jan 02, 2011 | Karcher Garden

1 Answer

Why do I lose pressure while spraying. The air comes and goes. I have to wait for the pressure to build back up to spray again.


Well, either a system leak or your compressor does not have the capacity for the air usage of the gun. Spray guns have high air consumption.

Oct 10, 2010 | Campbell Hausfeld Air Tools & Compressors

3 Answers

Does not give a continous high pressure flow cuts in and out


that is sure signal of insufficient water supply!

try easy solution first:
make sure that your mains is fully open, that tap on whihc hose is hook up is fully open and hose is of "decent" diameter to allow sufficient flow.

if above solution do not work then you need to make another, more difficult arrangement:
prepare 20litres pressure tank with inlet connected to mains and outlet by short hose to power washer, fill it with water from mains, keep it under mains pressure and use karcher power washer normaly. this will solve water supply problem. twenty litres will last about 2min, because it is re-filled, under standard pressure therefore it will last about 3min...

third possibility is to stop washing...

if you find my advice helpfull, please do not hesitate to left the comment and vote for me, thanx!

Jul 31, 2010 | Karcher K2.26 Electric Power Washer

1 Answer

The power washer is surging cuting in and out when i turn da nozzele to get stronger water pressure?


When I use my machine I hook up the water to the pump, hook up the high pressure line and gun, then turn on the water full and squeeze the triger to make sure all air is out before starting the pressure washer(mine is gasoline powered). Then I install the nozel on the spray gun. If you are having surgeing water pressure Check the hose washer where the water hose hooks to the machine, and be sure the supply hose is not restricted and valve is on full.
If this was helpful please leave Feedback. Thanks, SP

Oct 20, 2009 | Garden

1 Answer

STARTS AND RUNS FINE BUT WHEN I START WASHING IT QUITS SPRAYING AND THEN BUILDS PRESSURE AND KILLS ENGINE


The reason it stops spraying might be a clogged gun, hose or nozzle-tip.
The reason for pressure buildup killing the engine might be a stuck unloader valve in the pump.

While you are checking each component of the "output" side, spray some penetrating lube into the "input" side of the pump (where the garden hose connects) and let it be working on the unloader valve.

Fix the spraying problem first:
Start at the nozzle and verify that it is open by using low-pressure air. Clean or replace as needed. Next check the hose (with nozzle and gun unhooked) and finally the gun/trigger mechanism.
All must be clear and open to perform correctly.

Next, pour a few ounces of power steering fluid (or similarly LIGHT oil) into the garden hose, attach it to the pump and turn on the water supply.

Leave the "output" hose, gun, etc. UNHOOKED and point the output port of the pump (where the high-pressure hose connects) towards a vacant, safe area.
Startup the engine and allow the oil in the garden hose to work its way thru. (About 1 -3 minutes of run-time.) Shut it down and attach the high-pressure hose.
Hope this solves the problem!

Oct 05, 2009 | Honda Pressure Washer PSI 3000

1 Answer

Spray gun question


For the most efficient use of the gun, always make a careful check that all parts are the proper size and type, and are in perfect working order before operating. The following items can serve as a checklist: Manifolds and Regulators: The CFM capacity should be at least one and one half (1.5) times the total capacity required by the equipment. A separate regulator should control the atomizing air and all gauges should be readable and in good working condition. Moisture and Oil Traps: In order to assure the least amount of contamination of the Gel coat, moisture and oil traps should be installed and drained daily (minimum) on all air lines at the spray booth. Traps must be installed on the lines at least 25 feet away from the air compressor. Quick Disconnects: Quick disconnects are not recommended for airless or high pressure systems, and may reduce the volume of air and fluids passing through them. If they are used, they should be the largest size available. Hoses: Hoses are used only for delivering air from a regulator on a main air line and fluids from the fluid pump to the gun. The standard hose length is 25 feet and should never exceed 50 feet. Hose capacity should match the volume delivery and pressure demanded by the gun when the trigger is pulled. Hoses must be capable of delivering the material at the volume and pressure rates dictated by the gun. There will always be a pressure drop from one end of the hose to the other.

Aug 27, 2008 | Badger Basket Starter Spray Gun Hobby Set

2 Answers

Spray gun support


Daily clean-up all parts with proper cleaners/solvents. Re-lubricate where lubricant is washed away by cleaning. Moisture traps and compressor tanks must be drained daily.

Aug 27, 2008 | Viking Spray Gun: High Pressure Spray Gun...

Not finding what you are looking for?
Garden Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top FAIP Garden Experts

roeb

Level 3 Expert

813 Answers

john h

Level 3 Expert

21326 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Are you a FAIP Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...