Question about JVC TS-CL110UAA Projector Lamp

1 Answer

I have a green dot on my screen of my JVC HD52G887

I have a green dot on my screen

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 149 Answers

Hello. If it resembles a tiny bright green dot, this is most probably a dead pixel. In the troubleshooting guide in the user manual, the manufacturer states that some pixel loss is normal--either they will be gone or permanently "on". If the unit is new(i.e. still under some warranty) talk with the supplier about options--they *may* decide to replace it if the dot is in a particularly annoying location. Be aware though, they won't be under obligation to do so. I own a LCD projector with a few visible pixels--as devices such as these(lcd tv's, projectors, plasma, etc.) age, this type of phenomenon is going to occur. Normally--and this certainly isn't always true, there is a tolerance of 3-9 pixels. Check with the supplier and/or manufacturer for individual specs. Especially if the unit is under warranty!--Hope I successfully assisted you.---Rick

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Help with JVC HD52G887 red light blinking!!Please!!


The model indicated did have some real odd issues--some require a computer to actually be connected to a plug inside the set to address and or reset the processor in the set.

If the set functions except for this issue I would frankly just use it.

This is not unlike a issue I had in a older SUV---the check light would come on and constantly go off and on every 5 minutes like a clock---when looked up it meant something had triggered it but the issue did not exist any longer--a reset of the computer stopped this annoying problem and that light never came on again.

Kind of stupid but true.

Jun 02, 2012 | JVC HD52G887 52" Television

1 Answer

Keeps turning off


Lamp is "possible" but model indicated did have a number of problems that require firmware updates to be performed.

May 21, 2012 | JVC HD52G887 52" Television

1 Answer

CHANGE BULB HD52G887


Replace Lamp Call Encompass 1-800-638-3328 or Mats 1-80-628-1118

Jun 10, 2011 | JVC Televison & Video

1 Answer

HD52G887 BPA. We turn the power on but it keeps turning itself off. No picture, no nothing. Just the red and blue lights flashing on the front.


aseek02,

If you have never changed the lamp I would do that first. I have a tip at http://www.fixya.com/support/r4168009-change_lamp_in_dlp_projection_tv
which will walk you through the removal and reinstall process as well as tell you where to find the parts at the best price.

Thanks for using FixYa and for the great rating.

hardrocko

Apr 19, 2011 | JVC HD52G887 52" Television

1 Answer

Green, Red, and yellow dots on screen. symmetrically placed across screen. Will sometimes go away.


ptubb,

Your optical engine is failing and needs replaced. I have a tip at http://www.fixya.com/support/r4251975-replace_dlp_light_engine which explains the process as well as where to get the necessary parts.

Thanks for using FixYa and for the great rating.

hardrocko

Apr 09, 2011 | JVC HD-61Z575 61" Rear Projection...

1 Answer

JVC HD52G887 52 in. HDTV Television lamp light and power light blink alternatel. the lamp comes on and then goes out before the screen is visible and then the lights blink


you lamp may be cracked and need to be replaced or for some reason you may be having a surge, but my money is on the lamp. open it up and inspect the lamp for discoloration or cracks and buy a new one online and replace. This is really a cheap and easy fix

Dec 14, 2009 | JVC HD52G887 52" Television

2 Answers

Green dot on scren


I'm having the same issue on my older JVC GZ-MG model. It seems to only happen in low light situations. I can't believe there is nothing on the web about this.

Nov 23, 2009 | JVC Everio GZ-MG630 Hard Drive Camcorder

1 Answer

I would like to find a tv manual for a JVC molel HD52G887


Here you go:
http://resources.jvc.com/Resources/00/00/91/LCT2063-001D-A.pdf

Oct 25, 2009 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Lamp light blinking on and off and tv will only stay on about 5 sec


Replace Lamp Call Encompass 1-800-638-3328 or Mats 1-80-628-1118

Oct 05, 2009 | JVC HD52G887 52" Television

1 Answer

HD52G887 no sound


Hmm.. If you have your television hooked up via component connection.. you may be forgetting the audio cable. This is a very easy mistake to make while component cables usually dont come with audio or optical audio cables.

Dec 19, 2008 | JVC HD-52G786 52" Rear Projection HDTV

Not finding what you are looking for?
JVC TS-CL110UAA Projector Lamp Logo

736 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Office Equipment & Supplies Experts

MusicMania

Level 1 Expert

4 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

The Knight
The Knight

Level 3 Expert

75462 Answers

Are you a JVC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...