Question about Norcent Technologies LT-2025W 20 in. LCD Television

1 Answer

Since the new digital started I cannot get my channels. I tried to do the reset channels. That did not work. We get channel s 4 and 5 but no help. We have your Norcent Model # Lt-2025W digital TV. I was told we donot need a comverter box for this TV. It is not hooked up to Cable or any of those companies. Why can't I find your website? Took me forever to discover this site. Why can't I get a phone # to call you instead of having to have my daughter do this? Can you please help me out? Would greatly appreciate your help in getting back to watching our TV. Thank YOu Barb e-mail address. freds.farm1@frontiernet.net

Posted by on

  • freds_farm1 Jun 26, 2009

    Why aren't you helping us? Or possibly I can't figure out the solution to get to your solution. You sent me e-mail telling me you had the solution. I clicked on what said "1 Solution" but found nothing that led to this solution. Evidently we don't understand what to click on to get to your solution. So again, why don't you give me the EXACT STEPS to follow to fix our TV?

    Thanks again, but please help!!!! freds.farm1@frontiernet.net

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have not solved the problem. I can't figure out how to get the information from you to see if your suggestion will work. and I certainly cannot pay someone to help me. I cannot understand why a company would refuse to help us out without paying. Or how to make it understandable how to get to you to get the help. I've never heard of a company that does not have support or a telephone number to reach them to solve problems. No wonder I have never heard of this brand of TV before. It doesn't seem to be a reliable company to deal with. If I'm wrong about this I apoligize.
WILL YOU PLEASE HELP US? How do I figure out your answer to my question? I used the password you gave me and read all those questions and answers but none were mine. So if I was in the wrong place, please help me to get to the right place.
Thank You
Barb
freds.farm1@frontiernet.net

Posted on Jun 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset my westinghouse flat screen tv


if you are using an antenna for digital channels,it will search for 100 to 125 channels,if searching for the old analog channels,it only searches for 75 channels,but,you will not receive them,they are gone now,if you have a cable box,then you only need channel 3 or 4,

May 18, 2015 | Westinghouse SK-32H540S 32 in. LCD TV

Tip

Digitial channel tune in and set up


if you have a problem getting digital channels (uk) find local channel number digital uk can help enter tuning menu go to manuial tune on tv or digi box. it will ask for channel number start with highest number pess ok or search repeat for each channel number normal 4or 5 depends on aera if still not getting all channels put aerial lead which come for aerial into tv bypassing any equipment such as vcr/dvd recorder then start again if still not all channels may need aerial upgrade .if yo get all channels connect vcr/dvd if some channnels disappear need to reset RF out on vcr/dvd remove aerial .connect vcr/dvd via scart reset RF out on vcr/dvd this can be found in vcr/dvd set up menu reconnect all leads should now work ok
Note do not set RF out to any digi channel numer

on Aug 17, 2010 | Televison & Video

1 Answer

JVC LT22HD32J DIGITAL TV WONT HOLD CHANNELS AFTER RETUNE


It's October 2012 and I have a problem with my exact same model of JVC TV which has worked fine since i bought it in January. In fact it has worked the best out of the four that we have in the house working off the same aerial until 4 days ago. I tried retuneing and then the problem expanded to more channels. I tried to reset to factory options and then do a retune but lost all the channels. I have again reset and retuned and I'm back with channels that I can only tune into for between 4 and 15 seconds before the screen goes blank. None of the other televisions are affected. Digital UK website show no works to transmitters in our area and JVC are impossible to contact. Their site sends one around in circles in a most frustrating and unhelpful way. I will not be buying JVC again. Any help offered would be gratefully accepted!

Apr 14, 2012 | Televison & Video

1 Answer

I have a 19" magnavox


Do you have a digital converter box. If not, you need to get one to receive the analog channels.

Feb 06, 2011 | Televison & Video

1 Answer

Channels Playing up.


reset config, and seach again channels, Maybe a repair store help you on reset codes for your Tv

Dec 22, 2009 | Televison & Video

1 Answer

LG LCD TV 37LP1D digital freeview tuning problems


Hi - I have the same problem. Also in Cornwall LG were not interested in helping because the TV was 3 1/2 years old. There was a possible fix in the end offered via LG at a cost of £180 + vat - a hardware update that might or might not work but I was not going to pay that so I now watch my LG 42 plasma via a £25 digi box from the CO OP. LG must have sold 1000's of these Tv's so when the digital switch starts in the more populated areas of the country I exect many more web postings.

Oct 31, 2009 | Televison & Video

1 Answer

Lost channels


What I did after loads of trial & error trying t follow peoples advice on here so not sure how much of it you need t do (Stage 2) might not be neccessary so try 1) followed by 3) & 4) first ;o) :-

1) Deleted all the channels & reset the factory settings to 0000.
Turned off the box at the plug, left for a couple of minutes & turned back on

2) I reinstalled the software at http://www.4shared.com/file/76886028/fd4ac296/GTRom_the_box_Super_8102e_081129.html?err=no-sess (Not sure if thats necessary but I did so try this if 3 & 4 dont work without reinstalling)

3) Turned on the Box & went into the menu pressed 1570 on main screen to get into the CAS SASTEM & turned the EMU key ON

4) Reinstalled the channels using Telewest (Even tho I'm with Virgin) & voila, it worked & I can get all the channels again ;o)

Good luck - Stace

Jun 17, 2009 | StarTech.com StarView SV431USB 4-port KVM...

1 Answer

Tried the RF Out setting and now Ican't reset it or even get the STB to respond to set up or anything.


If you changed the RF out channel setting on the DTV converter and now can't see the output of the converter try changing the channel on the TV set. THe DTV converter boxes are designed to output either RF channel 3 or RF channel 4. If you were on channel 3 and changed the converter output to channel 4, you will have to change the TV channel to channel 4 to see it again.

Hope this helps.

Jun 15, 2009 | Insignia Digital-to-Analog Converter for...

2 Answers

No digital yet tried to retune but greyed out.


Just got through to Samsung support. Turns out the freeview card had frozen and needed a reset. To do this put tv on standby. then press in serries these buttons on the remote: 'info' 'menu' 'mute' 'power' TV will then turn on with a default screen. Press 'arrow down' button untill you reach option 12 'reset' . then push the 'right arrow' and tv will reset and start in plug and play mode and commence a scan when you've set the time. Just retuned mine and its back to normal. Hoorah!!! :-)

Jun 03, 2009 | Samsung LE32R73BD 32 in. HD-Ready LCD...

2 Answers

TV gets stuck on channel, won't advance past channel 7.1


Try doing the Channel Search again. See if that helps.

If not, sounds like the Digital Board could be defective. Since this TV is brand new suggest calling your local sharp authorized service center to replace that board under warranty.

Mar 16, 2008 | Sharp AQUOS LC-32D43U 32 in. LCD...

Not finding what you are looking for?
Norcent Technologies LT-2025W 20 in. LCD Television Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Norcent Technologies Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74482 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Norcent Technologies Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...