HOW DO YOU DISASSEMBLE THE TV FOR REMOVAL - Toshiba 65HDX82 65" Rear Projection HDTV-Ready Television

Question edited for clarity and spelling.
Question moved to sub category.

There is a video in the link.

https://www.google.com/search?q=2003+Ford+BA+Falcon+%22fuel+tank%22+removal

..

You have to disassemble the TV; fully; to replace it. Should have all tools to disassemble it, and much experience in work too.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Disassemble procedure to many popular brand TVs and other devices are given in detail with illustrations.

To disassemble it, you have to see some illustrations. If you wish to get more details about how to disassemble Toshiba TV, check this link. http://electronicshelponline.blogspot.com/ Pull up older posts there. Disassemble procedure to many TVs are given in detail, with illustrations.

Bottom left one looks like a torx screwhead .
Check the link to conffirm

Torx srewheads images Google Search

Here are 2 links,steering wheel removal,ignition lock cylinder removal.Here's the keys.

Power supply. Disassemble and be careful tv is not plugged in. Check capacitors on power supply for bulges on top. Replace but make sure u deenergize before removal by touching the two poles together. I use a small nail file

Remove the bottom ...

Go to www.hp.com/support to view a short video on removal procedures.

hire a ****** to do it

these are removal instructions should be helpful though



Open up the panel on the back of the TV which covers the various input connections. At the bottom of the area previously covered, there are 8 screws (two rows of four screws). Remove them, and the entire stand should now slide right out of the TV. You can then replace the screws back in their holes, so you don't lose them. You do not need to disassemble the stand to do this.