Connect Bluetooth I can't find the setting on the phone for adding a Bluetooth.

download to where ? If to a P.C use bluetooth if your P.C does not have bluetooth a usb adapter for blue tooth can be added to the P.
C. then you go to settings in P.C and connect the P.C to the Mobile phone (known as Pairing)

Here are the steps:
1. Make the partnership between the phone and the pc with the cable first and let it sync once.
2. Unplug the cable, turn on the bluetooth and make the pc and phone connect through bluetooth and save the device in the device list so it can connect everytime you want to sync without adding the device again.
3. Once they are connected to each other run active sync (with bluetooth still active) and press Menu-Connect via bluetooth. Here's the tricky part, it wont always connect. You have to do this a couple of times until you get a connection. For me its like 4-5 times and i get connected.

Thats it.

At first call to your customer care executive to send you for internet settings for your mobile. When you recive the settings then do the following things-

• Install the settings first.-go to your message inbox and find the settings message when you open it then get the install option. Just click on install option.
• Select your internet profile-just go to your internet menu and select settings. After that select Internet Profile and select GPRS option like Airtel Gprs/ Mobile Office if you are Airtel user.

After that Install Pc-Suite and

1. Activate Bluetooth on your mobile phone (usually found under the Settings menu) and set it to be discoverable or visible.
2. On the PC, find your Bluetooth program manager (in Windows XP and Windows 7, look under My Computer > My Bluetooth Connections; in Vista, look for Bluetooth devices in the Control Panel; on a Mac, go to System Settings > Bluetooth).
3. In the Bluetooth program, select the option to add a new connection or device, which will make the computer search for available Bluetooth devices and find your phone.
4. When your mobile phone appears, select it to connect/pair it to your laptop.
5. If prompted for a PIN code, try 0000 or 1234 and enter it on both the mobile device when prompted and your laptop.
6. When the phone has been added, you will be asked what service to use. Choose PAN (Personal Area Network). You should then have a working Internet connection.

Headset-

1. Make sure the headset is fully charged, turned off and within 1 m (3 ft) of the phone.
2. Press and hold the On/Off button for at least five seconds, until you hear a long high-pitched beep and the light flashes red and green. The headset is now in pairing mode.
3. If your phone supports auto pairing, press "Yes" when the question Add device? appears in your phone. If it doesn't, continue with the next step.
4. Prepare your phone in accordance with the phone instructions for adding a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.


X10-

1. From the Home screen, tap the applications bar.
2. Tap Settings > Wireless controls > Bluetooth settings.
3. Mark the Bluetooth check box.
4. The phone starts to search for the device. Make sure that the device is in pairing mode. If needed, tap Scan for devices.
5. When the device becomes visible in the Bluetooth devices found list, tap to select it.
6. If needed, tap the text bar to enter the passcode (0000 by default) and tap OK.
7. You can now start using the paired Bluetooth device. The status of the pairing and connection is shown below the name of the Bluetooth device in the Bluetooth devices list.


Good Luck!

Buy a phone with Bluetooth capability or connectivity. If your phone has no Bluetooth application from the factory then it can not be added. If your phone has Bluetooth you can always Enable it by checking the Connectivity Settings and Activating it so you can be able to use it to connect with other Bluetooth-ed accessories and other technologies.

I've got MY65T working on an iPhone 3GS. I previously had the problem where it would pair and retrieve phone book, but not transmit or receive voice from my iPhone when making a call.

The last thing I did that fixed it was to remove the bluetooth pairings and "reinstall software on your navman". I don't know if this may remove some of your settings / POI / etc. This was a new purchase so I didn't have anything to lose.

Before doing this I had upgraded the navdesk software to 7.30, and installed the latest firmware for MY65T. Firmware is located at http://www.navmansupport.com.au/Software/My%20Series/MY65T/MY250___352.htm

Details:
-remove the phone bluetooth pairing from the Navman from Settings / Bluetooth / My Paired Devices / [your phone] / delete
-remove the bluetooth pairing from your phone's settings
-connect navman to PC and launch navdesk
-click "My Navman" / "Reinstall software on your Navman"
-download the install file if prompted
-accept the reinstallation prompts and complete reinstallation
-set your phone to discoverable over bluetooth (just keep it on the Bluetooth settings screen on iPhone)
-go to Settings / Bluetooth /" Search new devices" on your Navman
-click your phone's name on the navman's discovered devices
-enter the PIN onto your phone when prompted and accept the pairing. This takes a little while.
-test handsfree!

try to restore to the factory settings or make a update

download from google that nokia model no with software try this on google

let phone in menu /settings searts for bluthooth device and the device like for earpusch on buton the same time device phone wil see it select connect and put code in 0000 and device are connect
if you want connect to pc you need first bluethooth device on pc like usb blue thooth stick and on pc you need software this are for free from itv bluesoleil google for it and also syngr software from microsoft.

Click on start > click on Vaio Central > click on the System Information tab > click the plus next to Network Connections > click on Wireless Switch settings > Click the box next to "Enable Bluetooth device" > click apply then OK. You should then see a blue light appear on near the keyboard near the WiFi switch. You will see another box that is labeled "Wireless Switch Setting Utility" that tells you a new icon has been added to the taskbar. Click okay. This icon that was just added should be helpful when working with your bluetooth devices. Hope this helps, let me know if you need anything else.