Multipass f60 I have a different computer for my multipass f60, I have the installation disk, but it states that it does not find the connection. I have Windows XP 2002. If I need to install a driver, which one and where do I get it?Thank you

1st You download Printer Driver. Canon Multipass Inkjet Printer Driver After this install the Printer driver in the system.
Installation of Printer Driver

• Go to the control panel
• Click on the System Icon
• Click on the Hardware Tab
• Click on the Device Manager then
• Select the Unknown Device or printer device where yellow Question Marks sign on it.
• Right click on it and uninstall it.
• After this go to the top of the device manager and click on scan for hardware changes.
• Driver installation Wizard start.
• Brows Your Driver from the Hard Disk and click on next.
• Driver will be install.

My canon c530 multipass fax machine has the alarm light blinking and wont fax anything. can anyone please help me?

Hi. if your multipass is connected to a computer you can check in the printer monitor status the exact error . Or you can count how many time the error display blinks

Look for solutions here...

http://www.canon.fr/Support/index.asp

Go to this web site. In the search window in the center of the screen, type "windows xp drivers" and click on the Search button. Select the first answer that shows, and you will receive instructions for downloading and installing drivers which were developed for using the MultiPASS F60 with Windows XP SP2.

Canon does not offer Vista drivers for the MultiPass F60. Vista may have some generic drivers that will work, so don't delete or over-ride them in the system.

The major problem is that the printer only supports USB 1.1 and not USB 2.0

Here is a link to Canon's MultiPass F60 Printer site ...
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=7174

Canon does not offer Vista drivers for this printer. Vista may support it through generic drivers. Plug it in a see. Do not try to install outside drivers.

ok maybe the nozzle is blocked (specially if u didnt use the printer for a while
so try to clean the nozzles
and by the way in the cartridges there are some kind of plastic strip did u remove that before installing the cartridge in ur printer???


that should be it my friend 
cheers

Try doing a system restore from a date prior to when you installed the drivers.

try re installing the drivers for this printer check all cable connections once again. did the printer work well at ur frens place? and wat os did he use??