Question about Nokia N73 Cellular Phone
Your problem may be that the software installation got interrupted, which is bad news, I think.
Nokia is hopeless when it comes to service. They seem to be happy with telling you to buy a new phone. Wonder why.
But there exist some ways to try it out.
The first thing to try is to remove the phones battery and leave it out for at least five minutes. Whilst doing this take the opportunity to reboot your computer in case you need it to help with recovery.
Now re-insert the battery and try to switch your phone back on. If it works then all is good .
if not ,
The next thing to try is a hard reset. This method only applies to S60 smartphones with keypads.(N73 =possible)
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, hold the power button for a second to switch on the phone.
4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
It may take a few attempts and very flexible fingers.
you have now tried everything possible to recover from the failure yourself. The last thing for you to do now is to contact a nokia care point in your country for help
You'll have to take it to a repair shop where they might be able to fix it.
Hope this will help you.
Posted on Mar 15, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 01, 2011 | Nokia 3110 Cellular Phone
Jul 27, 2011 | Nokia N73 Cellular Phone
First download and install
Phoenix Service Software 2011 - Download secondly Download flash file from this linkrm561_CareDP_13.00_NDT_09.9...exe (66,13 MB) - uploaded.to or Nokia flash file and install it to C / programme
files/pheonix..after finished this installation open pheonix Inside the interface at the> left top <there you see
"File" click there and choose "open file" and
then select the approprait Product type i.e"which is written in the
back banel inside the battery of every Nokia(Type RM-000).After doing
this again at the left top count from "File"1..2..3..the 4th one is
"Flashing" press there when you click there you'll see three
icon just select the "Firmware Update" again you'll see
another interface.Look at the product code there should be blank and put your
"mouse tool" at the straight end from the "Product Code"
there is a Botton and choose the code which is written in the
back side of your phone.e.g CODE:0000000.if the same code does not found
just take one.After this you can see "Dead phone USB flashing"
click that box.Now this is the last stage... Connect your phone with the USB
to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just
finished (In case your phone is Dead,unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish"
after this, a message will prompt you "press power botton"
press it and wait untill the phone will Restart automaticlly in normal mode
10-15 minutes.If you cannot understand just make a Reply thanks for
visiting fixya.Good luck.If you could not do please Reply.
Jul 25, 2011 | Nokia Classic 2700 Cell Phone
Jun 28, 2011 | Nokia 2730 Cell Phone
May 13, 2010 | Nokia N73 Music Edition Smartphone
Feb 13, 2010 | Nokia N73 Cellular Phone
Aug 30, 2009 | Nokia N73 Cellular Phone
Jun 24, 2009 | Nokia N73 Cellular Phone
Jan 04, 2008 | Nokia N73 Cellular Phone
122 people viewed this question
Usually answered in minutes!