Question about Pride Jazzy 1103 Ultra Standard Power Chair

Open Question

I have a wheelchair Jazzy 1103 Ultra and is 8 - controller error

Hi my name is Ana Cristina Restrepo from Colombia.
What can I do to fix this problem, is I don't have the posibility to send it to you for reapir.
I had opened the controller and I found out that there is not signal in the power MOSFETs VNP49N04; following the signal, I saw that there is not output in the 78L12 SMD, nether in the BSP762T besides there is voltage in the Vbb (pinouts 5, 6, 7, 8 of 762T) Vbb= Battery voltage, but the input of this IC (pin 2) is not enable by the microcontroller, I couldn't find any information about the microprcessor or microcontroller (PGDT VSI P76337/3). Is there a solutions for the controller? and if yes, Can you help me please to fix this problem?,
Thank you very much for your colaboration, I apresiate it
Best regards
Ana Cristina Restrepo
cristinarestrepo@lycos.com

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: i need the pinout of the jazzy 1103 ultra battery

Hello,
The Output voltage 24 - 29v ,Usually 27v. (And 4 Amps)
The Pin arrangement is Negative to the Left, Inhibit in the Middle, And Positive to the Right Assuming your looking into the plug itself from the front.
Always check with a Voltmeter first though because there are some chargers with the Opposite Pin Arrangement.

Posted on Jan 28, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset button


While replacing the batteries you may have bumped the brake releases. Release both and return them to the operate position. It is also possible to get one or both batteries backwards. This is a 24 volt system so pay close attention to the color codes on the cables. Be careful of shorts.

Nov 06, 2013 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

My brother who died about 2 years ago left a jazzy 1103 ultra mobility chair. Unfortunatley I cannot work out how to start it. Its all charged but can't find ingnition. Can you help please Anne ...


ana at the top of the joystick is the on/off button just push it and the lights sshould come on the battery level lights should all light up and you can set the speed with the two buttons on each side the left to slow down and the right to speed up. When all the speed lights are lit you are at max speed Hope this helps

Apr 19, 2011 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

How do i obtain the electrical diagram for a jazzy 1121


Hi
The Jazzy 1103 PDF document contains a lot of the electrical diagrams I've got it if you send your email address i'll send it 2 u. put the word at in place of the @ that will stop you getting sent spam

Tony

Oct 12, 2010 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

Need new joystick controller for Jazzy 1103 ultra mini


Who bought the chair you or Medicare? If Medicare they will pay for most of the repair cost Contact Repair Xpress at 1-877-581-3733

Jul 20, 2010 | Pride Jazzy 1103 Ultra Indoor Power...

1 Answer

I need the pinout of the jazzy 1103 ultra battery


Hello,
The Output voltage 24 - 29v ,Usually 27v. (And 4 Amps)
The Pin arrangement is Negative to the Left, Inhibit in the Middle, And Positive to the Right Assuming your looking into the plug itself from the front.
Always check with a Voltmeter first though because there are some chargers with the Opposite Pin Arrangement.

Dec 11, 2009 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

Problem with joystick on Jazzy 1103 ultra


You will need to take it in for repair. 8 bar flash usually means you have a bad joystick/controller. They can sometimes send it in to the manufacturer to have it repaired. Find a reputable dealer and relay this info to them.

Apr 01, 2009 | Pride Jazzy 1103 Ultra Indoor Power...

1 Answer

The power lift seat on my wife's Jazzy 1103 Ultra won't actuate.


most actuator motors have an in-line fuse, I think the one for pride 1103 is located under the cover at rear of chair or close to actuator motor

Mar 15, 2009 | Select Jazzy Used Electric Wheelchair

Not finding what you are looking for?
Pride Jazzy 1103 Ultra Standard Power Chair  Logo

Related Topics:

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1271 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Colin Taylor

Level 2 Expert

347 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...