I need belt routing diagram for ac130 allis chalmers riding mo2wer

Goggle it. Wiring diagram for ---------------

Hear for allis d-17,sure be close

Allis Chalmers 410 Service Manual

Specs Link:
Allis Chalmers 410

Parts Link:
Simplicity Allis Chalmers Mower Parts

Had a friend who took off his Yamaha branding on a Motorcycle and replace with AC brands - AC rocks.

Sounds like pulleys are out of alignment. Check to make sure no pulleys are seized up or out of alignment. With belt off, spin one at a time. Do this to all pulleys in the loop. By isolating them and checking one at a time, this will tell you which one is the culprit. Good luck and happy wrenching!

I’m happy to assist further over the phone at https://www.6ya.com/expert/layne_0fccff498c319c32

how to install pulley belts on an ac130 46" cut

Well first make sure that the routing coil is clean of debris and dirt. Then you are going to want to oil both sides before assembly. The cellinoid connects the same way an oscillating pendullum does. Just with a bolt! Easy as that on both ends....just be sure to adjust pressure from valve so you don't create a dangerous situation from pressure build up!!........Happy trails!

looking for in the oil cooler inside the radiator maybe is broken.

I also have the same tractor but i have what your looking for so my email address is [email protected]