Question about Projection Televisions
Looks like convergence is way off since the set was moved. I tried magic focus several time but no joy.
it sounds like your blue convergence ic is getting weak you need to replace the ic's STK392-110 and you should replace both because when 1 is bad the other will go real soon. They are inexspensive at the sight I posted and you will also get free tech online support if you purchase them there.
Posted on Apr 13, 2008
This must be adjusted by a professional television repair center
Or if you are me you can open it up and start looking for the internal focus adjustment block
normaly located on the flyback transformer
I highly recommend you don't go digging around in there unless you know what you're doing.
I'm not responsible for accidental death due to following my trouble shooting procedures.
Safety First !
Posted on Sep 15, 2008
This is a common problem with this TV, but there is an upgrade to correct the CONVERVGENCE circuit problem.
If you want to repair this concern yourself: Contact: B&D ENTERPRISES,
1-800-458-6053, www.bdent.com and ask for KIT10 for your Hitachi TV.
If you want some else to do the repair for you call an Authorized Service Center.
Needs convergence IC's
Good Luck,BIG IRISH.
Posted on Nov 23, 2009
Remove Front bottom Panel thier you will see front of convergence board there is a small blue contact switich with TV on press and hold it for 5 sec then you should see convergence Pattern so you can aline convergence correctly I have the whole Manual to tv just have to find it. anyway for now try this.
Posted on Dec 01, 2009
Testimonial: "Got me on the right track but newbe answers were a bit vague. I eventually found more detailed information via a Google search."
These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.
Convergence problems are very common on all Projection TV sets including Sony,Samsung, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith, and others. You can get a convergenece repair kit wiith instructions from the links below.
Here are some of the most common problems with these sets...
Problem #1) Convergence
Yours may have one or more of the following symptoms
Another common problem is dull or washed out video.
Your TV may have one or more of the following symptoms....
You can see some more examples and find a fix here
Posted on Apr 03, 2010
Tips for a great answer:
Jun 02, 2010 | Hitachi 57F500 57" Rear Projection...
on Jan 29, 2009 | Hitachi 53SBX59B 53" Rear Projection...
Feb 25, 2010 | Hitachi 43FWX20B 43" Rear Projection...
Dec 01, 2009 | Hitachi 53UWX10B 53" Rear Projection...
May 03, 2009 | Hitachi 53FDX20B 53" Rear Projection...
Jan 24, 2009 | Hitachi 46F510 46" Projection HDTV
Dec 29, 2008 | Hitachi 61SDX01B 61" Rear Projection...
Feb 04, 2008 | Hitachi 43UWX10B 43" Rear Projection...
224 people viewed this question
Usually answered in minutes!