Question about Irons
Why is my hinari steam iron stuck on standby
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
More complete answer...
If you are having steam problems then the cartridge needs changing.
I phoned them (0161 652 1211) and they do sell the cartridge for £5.99 including delivery but are out of stock for a couple of weeks. You have to send them a cheque or postal orders. Good luck.
Send Cheque for £5.99 for each cartridge with note of model etc.
Pulse Home Products Ltd.
Posted on Oct 07, 2008
Hi Mary, sounds like something jammed in the trigger mechanism or the microswitch button is stuck in the housing. Unplug the iron, let it cool. Gently pry up the blue cushion from the handle from the front towards the rear cord, you will see the trigger, the actuator tab and the microswitch button (nib) that should be sticking out, if it is flush with the housing it is jammed down. That switch is replaceable, but I don't know how savy you or your appliance servicer are at replacing it. Here is where I get my parts:
California Electric Service in Concord CA (it is the only Rowenta repair station in California) go to either of the following addresses:
their website is: http://www.californiaelectricservice.com/
or tech service: firstname.lastname@example.org
Please keep us informed as to your progress resolving this...
Posted on Jun 06, 2010
Check the water reservoir of the steam generator and look for some hairline cracks. Also a clogged tubing will likely to go back water on reservoir inlet water pouring. Once you found the cracks, seal it with epoxy just enough to fill the cracks.
Thanks for asking.
Posted on Jul 13, 2011
SOURCE: The iron will not steam
Always switch off the unit and allow to cool before cleaning or storing. .... If your steam generator does not work, check the following points: ... working temperature, the LOW STEAM ICON will flash whilst the heating cycle takes place ... steam. 9 When ironing is complete, press the POWER. STANDBY button.
Posted on Jul 27, 2011
Tips for a great answer:
Jan 23, 2017 | Irons
Mar 05, 2016 | Irons
May 22, 2013 | Irons
Jul 29, 2011 | Rowenta Steam Generator DG050 Iron
Jul 13, 2011 | Rowenta Steam Generator DG050 Iron
Feb 03, 2011 | Maytag MLI7500A Iron
May 21, 2010 | Rowenta Steam Generator DG050 Iron
Oct 24, 2009 | Maytag MLI7500A Iron
Oct 17, 2009 | Hamilton Beach Steam Excel 14770 Iron
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: